PI3A Pro 3D control box Firmware upload Error codes

Post Reply
barkersoldbean
Posts: 2
Joined: Sun Sep 02, 2018 12:19 am

PI3A Pro 3D control box Firmware upload Error codes

Post by barkersoldbean » Sun Sep 02, 2018 12:28 am

Hi learned folks - I'm new to 3D printing and struggling to flash the firmware with a mod to change the Y axis direction.

Using Arduino 1.0.1 as instructed, loading up the correct firmware (as per the Geeetech site) for my version - with the lead screw mod and the 3 D control box.

Firmware loads up in to the Arduino IDE, got the correct com port set and Arduino board (2560/Mega) as instructed.

Try and upload and I get this error stream;

uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg)

Any help much appreciated

T

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: PI3A Pro 3D control box Firmware upload Error codes

Post by Gingko » Mon Sep 03, 2018 6:23 pm


Post Reply