I3 A older model extruder motor not working

Post Reply
Dekard2018
Posts: 0
Joined: Sun Apr 22, 2018 7:00 pm

I3 A older model extruder motor not working

Post by Dekard2018 » Sun Apr 22, 2018 7:42 pm

Hello,

very new to this. Been given a I3 A, full aluminium body. All put together and everything apart from the motor on the extruder seems to work. If I plug it into the Y axis motor port it works fine. This rules out the motor and wiring up to it. Pins on the control board look fine, not bent or creating a short. Could do with some suggestions.

Thanks.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 A older model extruder motor not working

Post by William » Tue Apr 24, 2018 8:42 pm

You can try to swap the A4988 of Y axis motor and extruder motor
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply