M201 Printer Display Module Cover.

Post Reply
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:
Contact _kaktus_

M201 Printer Display Module Cover.

Post by _kaktus_ » Thu Jun 20, 2019 4:26 pm

Hello.
:mrgreen:

I was asked to share my enclosure designs for the printer.

And here's the first one.
Right away my reset button is included in the set.

Watch, print and express your opinions.

After printing the case, I glued a copper adhesive tape inside to reduce the impact of electromagnetic interference.
.
obudowa_z_miedzianym_ekranem.jpg
obudowa_z_miedzianym_ekranem.jpg (344.53 KiB) Viewed 3396 times
.
widok_po_zmontowaniu.jpg
widok_po_zmontowaniu.jpg (296.26 KiB) Viewed 3393 times
.

If anyone would like to offer me a beer, they can do it by sending a small gift to my PayPal account at jjj.p@interia.pl
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: M201 Printer Display Module Cover.

Post by William » Fri Jun 21, 2019 9:34 am

Hi, Great design, thanks for your share.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech I3 M201”