Extruder mount

Post Reply
Bs2000
Posts: 16
Joined: Sat May 11, 2019 3:42 am

Extruder mount

Post by Bs2000 » Fri May 31, 2019 8:12 pm

So when I go to mount the extruders the holes pre drilled leave the bracket setting on a mount screw. Am I doing something wrong?
Attachments
IMG_20190531_081140.jpg
IMG_20190531_081140.jpg (331.07 KiB) Viewed 3926 times

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Extruder mount

Post by _kaktus_ » Fri May 31, 2019 9:56 pm

Hi.
:mrgreen:

Look how I did it.
This assembly resulted from my observations and reflections. :idea:
.
ekstruder_M201.jpg
ekstruder_M201.jpg (249.26 KiB) Viewed 3921 times
.
Bowden tubes lay more freely when printing. There are no such big bends. Each bend in the tube leads to a narrowing of its diameter. This in turn leads to a greater difficulty for the filament that moves inside of it. :D


˙ǝɯᴉʇ ǝɥʇ llɐ ɹoʇᴉuoɯ ʎɯ ǝʇɐʇoɹ oʇ ʇuɐʍ ʇ,uop I ˙soʇoɥd ɹnoʎ ɥsᴉlqnd noʎ ɥɔᴉɥʍ uᴉ uoᴉʇɐʇuǝᴉɹo ǝɥʇ oʇ uoᴉʇuǝʇʇɐ ʎɐԀ ˙noʎ oʇ ǝʞɐɯ oʇ ʇsǝnbǝɹ ɐ ǝʌɐɥ oslɐ I
:lol:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply