Replace motor drivers with TMC2208 or TMC2130
Replace motor drivers with TMC2208 or TMC2130
hi, I want to improve my printer by changing the driver with TMC2208 or TMC2130, anyone has done it?
Re: Replace motor drivers with TMC2208 or TMC2130
Hi, you can refer to this:viewtopic.php?f=18&t=60658&p=82941&hilit=TMC2130#p82941
I hope this can help you.
I hope this can help you.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Replace motor drivers with TMC2208 or TMC2130
Hello.
Some time ago I bought modules with Trinamic chips.
Unfortunately, the low processing capacity and a lot of activities cause that I haven't conducted any research on improvements in this area yet.
In confidence I'll tell you that I expect to improve the work, and another possibility to increase the speed of the printer.
With our motherboard, there are compatible modules with the TMC2208 driver.
Be very careful when mounting the modules in the sockets. A mistake may result in the destruction of the main µC.
If you want to use these on TMC2130 chips it is possible. However, some modifications will be required.
Some time ago I bought modules with Trinamic chips.
Unfortunately, the low processing capacity and a lot of activities cause that I haven't conducted any research on improvements in this area yet.
In confidence I'll tell you that I expect to improve the work, and another possibility to increase the speed of the printer.
With our motherboard, there are compatible modules with the TMC2208 driver.
Be very careful when mounting the modules in the sockets. A mistake may result in the destruction of the main µC.
If you want to use these on TMC2130 chips it is possible. However, some modifications will be required.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.