temperature problem when printing

Post Reply
Rush68
Posts: 38
Joined: Tue Feb 26, 2019 9:30 am

temperature problem when printing

Post by Rush68 » Tue Apr 30, 2019 10:42 pm

Hello everyone, I have a problem when I print.
I bought a Delta Rostock mini G2s pro, it starts printing very well and I already printed several pieces, but now it gives me an error of maximum temperature reached at a certain moment of the printing, which could be, I use the program repetier-host v2 .1.3

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: temperature problem when printing

Post by _kaktus_ » Tue Apr 30, 2019 11:53 pm

Hello.
:mrgreen:

Have you tried to lower the temperature by e.g. 5°C?
Repetier Host draws graphs for temperature, you can analyze what happens over time.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Rush68
Posts: 38
Joined: Tue Feb 26, 2019 9:30 am

Re: temperature problem when printing

Post by Rush68 » Wed May 01, 2019 12:40 am

ok, thanks, I'll try

Rush68
Posts: 38
Joined: Tue Feb 26, 2019 9:30 am

Re: temperature problem when printing

Post by Rush68 » Wed May 01, 2019 3:20 am

decreased 8 degrees centigrade and I still have the same problem

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: temperature problem when printing

Post by _kaktus_ » Wed May 01, 2019 3:53 am

Hi.
;)

Have you seen the temperature chart in RepetierHost?
Can you show the screen :?:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Rush68
Posts: 38
Joined: Tue Feb 26, 2019 9:30 am

Re: temperature problem when printing

Post by Rush68 » Thu May 02, 2019 11:11 pm

hi here is the screenshot of the problem
problema temperatura.jpg
problema temperatura.jpg (278.38 KiB) Viewed 12340 times

Rush68
Posts: 38
Joined: Tue Feb 26, 2019 9:30 am

Re: temperature problem when printing

Post by Rush68 » Tue Jun 11, 2019 11:18 am

Hello everyone, thanks to everyone, it is noted that in this forum is supported, I already solved it were thermistors, thanks for your help

Post Reply