Profiles for Repetier Host / Slic3r for A20M?

Share your configuration profile, please specify your printer model and the slicer software.
BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Wed Apr 24, 2019 8:55 pm

Hello,
I'm looking for profiles for the A20M to be used with Repetier Host and the Slic3r software.

The print of the test Dog is quite well but my own parts I tested were underextruded. So I increased extrudion to 120% and later to 150%, but it didn't help.

Or should I try a slower speed?

Is there a Config Bundle available for Slic3r?

Moritz

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by Tomyuan » Thu Apr 25, 2019 9:24 am

Maybe mine's is not perfect.
But you can have a try:
Geeetech A20M.zip
(1.76 KiB) Downloaded 323 times

User avatar
William
Site Admin
Posts: 4675
Joined: Tue Jun 07, 2016 9:38 am

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by William » Thu Apr 25, 2019 9:36 am

Does the extruder working temperature achieve Preset temperature?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Thu Apr 25, 2019 1:23 pm

William wrote:
Thu Apr 25, 2019 9:36 am
Does the extruder working temperature achieve Preset temperature?
Hello William,
I don't have a thermometer, therefore, I didn't check this. The Dog was printed with 205°C:

Image

This looks very good, I think.

See Discussion here: http://www.geeetech.com/forum/viewtopic ... 08&t=68468

Thanks,
Moritz

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Thu Apr 25, 2019 1:30 pm

Tomyuan wrote:
Thu Apr 25, 2019 9:24 am
Maybe mine's is not perfect.
But you can have a try:
Geeetech A20M.zip
This one is for ABS, isn't it?

Maybe interesting would be the E-Step value of Your setup. Maybe, my value isn't perfect. I didn't check yet.

Greetings
Moritz

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by Tomyuan » Thu Apr 25, 2019 1:42 pm

Hi,BR365

:D
I am using the PETG for my A20M.
You can change the temp of the bed+temp of the hotend.
Then the others settings same as my PLA setting

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Thu Apr 25, 2019 1:45 pm

Tomyuan wrote:
Thu Apr 25, 2019 1:42 pm
Hi,BR365

:D
I am using the PETG for my A20M.
You can change the temp of the bed+temp of the hotend.
Then the others settings same as my PLA setting
Thanks,
and could You tell me Your value for Esteps/mm?

Moritz

User avatar
Tomyuan
Posts: 41
Joined: Thu Jan 11, 2018 3:55 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by Tomyuan » Thu Apr 25, 2019 1:57 pm

If you want to calibrate your estep.
Refer to this vid:
https://www.youtube.com/watch?v=X3A9Ir2SreI

My estep is 457
:D

BR365
Posts: 57
Joined: Mon Apr 16, 2018 7:24 pm

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by BR365 » Thu Apr 25, 2019 1:59 pm

Tomyuan wrote:
Thu Apr 25, 2019 1:57 pm
If you want to calibrate your estep.
Refer to this vid:
https://www.youtube.com/watch?v=X3A9Ir2SreI

My estep is 457
:D
Thanks, I will check.

My current value is 340, AFAIK.

User avatar
vert
Site Admin
Posts: 748
Joined: Wed Nov 21, 2018 3:50 pm
Location: INDOORS

Re: Profiles for Repetier Host / Slic3r for A20M?

Post by vert » Mon May 13, 2019 2:53 pm

esteps on the a10m/a20m is 430 if you got another number something is off.

1)feeder is slipping
2)vref is to low resulting in step loss
3)the disks inside the throat have become clogged and are back pressuring (these should just be removed retraction cant function with them)
4)micro stepping might be set wrong.
5)one of the jumpers under the driver may not be making contact.
6)may have done the calibration incorrectly (speed/measuring/ect)
7)material variances

there are more but listing 100 things isn't really appropriate.
Get The Current Marlin 2.0 Build For Almost All Geeetech 3D Printers Here
A10 M D T/A20 M T/I3PRO A B C W X/E180/A30/Mecreator2/M201/D200

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests