Leveling Problem what do i wrong

Post Reply
Helmut3124
Posts: 2
Joined: Tue Jul 21, 2020 2:41 pm

Leveling Problem what do i wrong

Post by Helmut3124 » Thu Jul 23, 2020 4:33 pm

Hi

Can anyone please help me? With my 3d touch can i do the z homing but when i try to level my bed my z axes runs on my glasplate :cry:
Thank you

GAQ
Posts: 101
Joined: Mon Jan 08, 2018 9:10 pm
Location: Manchester UK
Contact:

Re: Leveling Problem what do i wrong

Post by GAQ » Wed Jul 29, 2020 6:02 am

Hi,
Without knowing which version of the firmware you're using...
When I installed my firmware, I started out with a BL Touch.
I used the firmware Marlin-1.1.9_bugfixes_02102019 given by wwysocki...
It ran 1st time for me.
https://www.geeetech.com/forum/viewtopi ... 412#p90623
From memory, this also has the configuration.h file already configured for T8 leadscrews - but that's a simple mod.
What version of the firmware are you using ?
Gerry

ComplexDino
Posts: 1
Joined: Thu Aug 27, 2020 5:07 pm

Re: Leveling Problem what do i wrong

Post by ComplexDino » Thu Aug 27, 2020 5:09 pm

GAQ wrote:
Wed Jul 29, 2020 6:02 am
Hi,
Without knowing which version of the firmware you're using...
When I installed my firmware, I started out with a BL Touch.
I used the firmware Marlin-1.1.9_bugfixes_02102019 given by wwysocki...
It ran 1st time for me.
https://www.geeetech.com/forum/viewtopi ... 412#p90623
From memory, this also has the configuration.h file already configured for T8 leadscrews - but that's a simple mod.
What version of the firmware are you using ?
Gerry
Very informative and useful article for beginners!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests