When printing, sometimes the extrusor suddenly leaves the piece pattern and travels in X or Y direcction until bed ends, come back and restart the print process. The result is a bad quality piece as the image.
Anybody experienced a similar problem? What could cause this behavior?
Diego
PLA threads on piece
PLA threads on piece
- Attachments
-
- IMG_20190310_001901_696.jpg (222.17 KiB) Viewed 5703 times
-
- IMG_20190310_001214_783.jpg (201.88 KiB) Viewed 5703 times
Re: PLA threads on piece
It seems your pirnter has a issue of retraction.
Try to check the gcode at first.Then check the temp of the nozzle.
For PLA:190~215c is ok.
Try to check the gcode at first.Then check the temp of the nozzle.
For PLA:190~215c is ok.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: PLA threads on piece
Hello.
Some slicer programs have an option: cooling by retracting the head.
The effect may be similar.
Some slicer programs have an option: cooling by retracting the head.
The effect may be similar.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: PLA threads on piece
I think it is not a retraction problem, the threads are created during the random travels the extrusor does until the end of the bed. I am not solved the issue yet . . . anybody have a similar problem?
Re: PLA threads on piece
Hi.
You can attach your Gcode file with this model here.
I will check on my printer if it will be created correctly.
You can attach your Gcode file with this model here.
I will check on my printer if it will be created correctly.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: PLA threads on piece
Here a gcode model where my printer fails . . . it begins to fail in the first 30 minutes yet and in a similar way of the previous photographs
Re: PLA threads on piece
We want to check your gcode file.
But we found your gcode file type is .gco.Not the standard .gcode type.
We can't find your setting from your files.
We suggest you attach the slice setting.
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!