Extruder motor wont't turn....:(

Post Reply
xyzsuperstar
Posts: 5
Joined: Wed Oct 03, 2018 10:39 pm

Extruder motor wont't turn....:(

Post by xyzsuperstar » Sat Oct 06, 2018 11:45 pm

Hi

I've swapped wires and driver boards and tested the extruder motor (turns) but i can't get the extruder motor to turn during printing, or manually...i'm guessing this is a firmware problem??

Does anyone know how to edit the firmware for this issue? I'm running Marlin 1.1.8.

I'm a complete beginner to 3D printing so help would be much appreciated!

John

xyzsuperstar
Posts: 5
Joined: Wed Oct 03, 2018 10:39 pm

Re: Extruder motor wont't turn....:(

Post by xyzsuperstar » Sun Oct 07, 2018 5:19 am

PROBLEM SOLVED. I changed DISABLE_INACTIVE_EXTRUDER to false and now the stepper motor rotates.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Extruder motor wont't turn....:(

Post by _kaktus_ » Sun Oct 07, 2018 5:32 am

Hi
:mrgreen:

Applause for self-reliant work.
:D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

xyzsuperstar
Posts: 5
Joined: Wed Oct 03, 2018 10:39 pm

Re: Extruder motor wont't turn....:(

Post by xyzsuperstar » Sun Oct 07, 2018 6:42 am

_kaktus_ wrote:
Sun Oct 07, 2018 5:32 am
Hi
:mrgreen:

Applause for self-reliant work.
:D
Hi

Thanks, the printer is now printing something so i'm well chuffed! :D They don't make it easy for us...

Post Reply