First print problem

Post Reply
casaland
Posts: 2
Joined: Sun Jul 15, 2018 6:44 pm

First print problem

Post by casaland » Sun Jul 15, 2018 6:53 pm

Hi to all,
I try to start my first print with I3B but I got some trouble. I tried to load my sample to the printer but set temperature are not loaded and printer doesn't start.
Any help?
Thanks in advanced.
Attachments
IMG_20180715_122338.jpg
IMG_20180715_122338.jpg (211.33 KiB) Viewed 4575 times

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: First print problem

Post by _kaktus_ » Mon Jul 16, 2018 12:45 pm

Hi
:mrgreen:

Which software do you use?
Have you tried to make a head movement from the slicer panel?
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: First print problem

Post by Gingko » Tue Jul 17, 2018 5:54 pm

Did you print through SD card or USB?
Can you directly set temperature through LCD or slicer software?

casaland
Posts: 2
Joined: Sun Jul 15, 2018 6:44 pm

Re: First print problem

Post by casaland » Wed Jul 18, 2018 11:59 pm

Hi
I use the one installed, no software upgrade is done.
I connect the printer via USB.
No I'm not able to move the extruder by slicer

What can I do?

Post Reply