A30T Profile CURA

Post Reply
ewo68
Posts: 17
Joined: Wed Mar 25, 2020 9:54 pm

A30T Profile CURA

Post by ewo68 » Sun Oct 25, 2020 9:00 pm

hello, under cura 4.7.1 there is no A30T model and under the geeetech A30 profile, I can select the 3 extruders.
My question is how to configure my A30T printer under cura and integrate the profiles designed under cura which are in the downloads from the site.
Could someone explain to me the best way to use Cura for my A30T?
Thank you

Post Reply