Upgrading from A30M to A30T - No UI upgrading

ktown1900
Posts: 29
Joined: Thu Feb 21, 2019 7:21 am

Upgrading from A30M to A30T - No UI upgrading

Post by ktown1900 » Sat May 16, 2020 6:30 am

Hi,

I have successfully updated my A30M to an A30T(info shows A30T). Only the display UI files don't show the correct parts(mixing interface with 3 extruder) of an A30T.

I follow the step by step guide at the firmware on the side.

-> Put the system and the A30T_S02_V1_01.bin to root card.
-> add a config.txt (with boot:1;bin_name:A30T_S02_V1_01.bin;) to root of sd card
-> start printer again
-> nothing happen

I checked the usb port on the side and directly on the mainboard.

What can I do? Any helps?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by William » Mon May 18, 2020 10:07 am

Hello, you can try to drag the system file into the SD card, don't forget to delete other contents on the SD card,
and then insert the SD card into the card slot.
Remember to remove the SD card after the update.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ktown1900
Posts: 29
Joined: Thu Feb 21, 2019 7:21 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by ktown1900 » Tue May 19, 2020 6:04 am

I did it but with no action. You mean the system file from the update?

Any other files on the sd? Without config?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by William » Tue May 19, 2020 9:27 am

Yes, you need to put the entire system file into an empty SD card and then insert it into the card slot.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ktown1900
Posts: 29
Joined: Thu Feb 21, 2019 7:21 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by ktown1900 » Wed May 20, 2020 3:43 am

I do this. But the printer do nothing.

ktown1900
Posts: 29
Joined: Thu Feb 21, 2019 7:21 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by ktown1900 » Wed May 20, 2020 4:45 am

I put this on my sd card. Insert it in my A30M printer. But there are no action on my printer.

Is there anything to do on the printer menu? What happen when it starts?
Attachments
system.rar
(1.01 MiB) Downloaded 384 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by William » Wed May 20, 2020 11:15 am

Hi,
1. Update motherboard firmware
2. Update the screen program and UI. Your previous operation is correct, but the SD card needs to be inserted into the card slot of the screen.
A30T firmware version V1.01.01

Motherboard application: A30T_M09_V1_01.bin (CRC32: A472CDCC)

LCD screen application: A30T_S02_V1_01.bin (CRC32: E0A6016E)

The mainboard application uses the "firmware_tool_V2.0" burning tool for burning and must be the firmware_tool tool of V2.0 or later.
This is how to update the screen program and UI:
FileRecv.rar
(158.33 KiB) Downloaded 391 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ktown1900
Posts: 29
Joined: Thu Feb 21, 2019 7:21 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by ktown1900 » Fri May 22, 2020 5:42 am

I use this manual a lot of times. But there is no update of the ui.

Any chance to do it on another way?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by William » Fri May 22, 2020 10:19 am

Hi,did you add a space when editing?this is not acceptable.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ktown1900
Posts: 29
Joined: Thu Feb 21, 2019 7:21 am

Re: Upgrading from A30M to A30T - No UI upgrading

Post by ktown1900 » Mon May 25, 2020 3:17 am

Can you send me the completely files on the as card. No space on it.

Post Reply