Random Vertical Gaps between External Perimeter
-
- Posts: 1
- Joined: Tue Mar 03, 2020 10:46 am
Random Vertical Gaps between External Perimeter
I've had the issue of many of my prints having a small gap between the external layers of the perimeter. Sometimes the gap appears on just one side of the object and not the other, or all-around in different heights. I've managed to mitigate the horizontal gaps between the infill and perimeters on top, but the Vertical gaps are still plaguing my prints. For Slicing, I use Repetitor Host and Slic3r.
- Attachments
-
- 20200327_133259.jpg (88.64 KiB) Viewed 3530 times
-
- 20200327_132739.jpg (67.17 KiB) Viewed 3530 times
-
- 20200327_132835.jpg (122.11 KiB) Viewed 3530 times
-
- 20200327_132848.jpg (155.19 KiB) Viewed 3530 times
Re: Random Vertical Gaps between External Perimeter
Hi, See if the z-axis threaded rod is complete,
Check if the machine is loose.
If the bearing or pulley is stuck, add lubricating oil to lubricate.
Check if the machine is loose.
If the bearing or pulley is stuck, add lubricating oil to lubricate.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!