Hard point on z axi

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Sat Aug 17, 2019 2:49 am

I think I have found the problem, I just disassemble the left wheel up, and the wheel on the bottom left turn by hand. The holes for the screw do not align, can we correct that?

Thanks

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Sat Aug 17, 2019 2:50 am

This is a picture
Attachments
IMG_20190816_191407.jpg
IMG_20190816_191407.jpg (217.42 KiB) Viewed 6663 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hard point on z axi

Post by William » Sat Aug 17, 2019 9:08 am

Hi, Are you referring to the screw type mismatch?
You can get in touch with your sales to replace it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Sat Aug 17, 2019 2:11 pm

is not in front of the hole
Attachments
IMG_20190817_080928.jpg
IMG_20190817_080928.jpg (235.62 KiB) Viewed 6659 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hard point on z axi

Post by William » Sat Aug 17, 2019 2:35 pm

:) You can change the bearing wheel to change this situation.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Mon Sep 16, 2019 5:23 pm

Hi,
I changed the wheel and the supports. And I still have the same problem :(
you don't have another solutions ?
Thank's.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hard point on z axi

Post by William » Mon Sep 16, 2019 5:52 pm

Hi, You can check if your z-axis threaded rod is bent or missing;
Check if your brass nut is too tight and loosen properly;
Check if the bearing or the pulley is issued (issued with lubrication and lubricated).
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Mon Sep 16, 2019 6:00 pm

Thank you for your help :)

Sorry, when I say that I still have the same problem I talked about the screw that does not fall in the face of the hole, for all I changed by new supports.

Regard's

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hard point on z axi

Post by William » Mon Sep 16, 2019 6:10 pm

Oh, I refer to the threaded rod of the z-axis and the tightness of the brass nut.
such as:
IMG_20190916_180841.jpg
IMG_20190916_180841.jpg (1.15 MiB) Viewed 6236 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Briciou62500
Posts: 54
Joined: Mon Aug 27, 2018 5:08 pm

Re: Hard point on z axi

Post by Briciou62500 » Mon Sep 16, 2019 6:24 pm

I did not understand you answer, you want a picture of my Z axis.

Post Reply