Repetier-Host not connecting

Post Reply
gamura
Posts: 18
Joined: Fri Jun 23, 2017 7:11 am

Repetier-Host not connecting

Post by gamura » Fri Jul 20, 2018 3:02 am

Hi!

This is not an issue, just something I found out yesterday when I tried to connect my A30 with Repetier-Host, as Ive done with my other 3D-Printers before. First you have to find out what COM port your printer is connected to and setup your printer as usual within Repetier-Host. But you have to set the Baud rate to 115200. My Mecreator uses 250000 Baud as default but when I tried using the same Baud rate for the A30, the printer just restarts and Repetier-Hosts closes the connection when I try to connect. As mentioned, setting the Baud rate to 115200 fixed this issue and now I can print stuff. Perhaps it is just me or my computer but maybe someone faces the same issue. Currently the MeCreator2 and A30 are connected at the same time.

Hope this helps,

Gamura

PS:
I still get some errors like "erro2" from the printer, but I think Repetier-Host just resends the corresponding command again. My prints look good so far.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Repetier-Host not connecting

Post by _kaktus_ » Sat Jul 21, 2018 2:33 am

;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

vuanm
Posts: 3
Joined: Mon May 14, 2018 5:38 am

Re: Repetier-Host not connecting

Post by vuanm » Fri Aug 31, 2018 6:16 am

ciao io mi collego con Repetier-Host 2.1.3 ma anche se imposto tutto correttamente inviando la stampa inizia a stampare su un angolo e no al centro anche se io ho posizionato il pezzo al centro sul pc come mai?

Alex-w
Posts: 148
Joined: Thu Jun 05, 2014 2:24 pm

Re: Repetier-Host not connecting

Post by Alex-w » Fri Aug 31, 2018 3:58 pm

FAQ:viewtopic.php?f=96&t=61534

Mecreator2(GT2560)--Baudrate 250000
A30(GTM32)--Baudrate 115200

Another source: https://github.com/Geeetech3D/Knowledge

Post Reply