Which type of lead screw

Post Reply
peterelkjaer123
Posts: 6
Joined: Tue May 23, 2017 7:08 am

Which type of lead screw

Post by peterelkjaer123 » Thu Jan 25, 2018 1:53 am

I can't seem to find any specifications on the lead screws used on the a30. I have just bought one, and it has been a fight to get it running smoothly.

The lead screw are not straight, which gives me all kinds of trouble the first 100 mm of a print. I am really desperate to get some new ones on it.

I hope someone can help me.

Regards

Peter

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Which type of lead screw

Post by William » Thu Jan 25, 2018 5:08 pm

You should contact the related sales and they will send you a new one
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Octagonman
Posts: 0
Joined: Fri Jan 05, 2018 3:18 am

Re: Which type of lead screw

Post by Octagonman » Mon Apr 02, 2018 7:30 am

I have the same issue and I have talked to the sales people about it and they ignore me. Also my heated bed is now useless because it automatically heats up to the highest temp possible if I turn on my machine. Even if all I do is flip the power switch to the machine.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Which type of lead screw

Post by William » Mon Apr 02, 2018 7:54 pm

Octagonman wrote:
Mon Apr 02, 2018 7:30 am
I have the same issue and I have talked to the sales people about it and they ignore me. Also my heated bed is now useless because it automatically heats up to the highest temp possible if I turn on my machine. Even if all I do is flip the power switch to the machine.
I think the issue root is the MOSFet
You can try to do this for a test
1.Swap the heat bed cable and nozzle cable of the mainboard
2.Swap the thermistor of the nozzle and heat bed
Then you control item to heat up to 60C
If the issue still exist,you need to contact sales to resend you a new mainboard
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply