Printing Pause

Felix_E180
Posts: 0
Joined: Sun Mar 18, 2018 4:32 pm

Printing Pause

Post by Felix_E180 » Sun Mar 18, 2018 4:59 pm

Hello,

I have a problem with my Geeetech E180 printer. During the printing process, the printer pauses automatically. This process must then be continued manually. These breaks occur at irregular intervalls.
Does anyone know what to do there?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Printing Pause

Post by William » Mon Mar 19, 2018 7:02 pm

Could you upload the G-code files?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Felix_E180
Posts: 0
Joined: Sun Mar 18, 2018 4:32 pm

Re: Printing Pause

Post by Felix_E180 » Wed Mar 21, 2018 2:27 am

How can I upload the files?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Printing Pause

Post by William » Wed Mar 21, 2018 2:54 pm

You can upload it to the Google drive and then attach the link to the post
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Felix_E180
Posts: 0
Joined: Sun Mar 18, 2018 4:32 pm

Re: Printing Pause

Post by Felix_E180 » Sat Mar 24, 2018 4:03 pm


User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: Printing Pause

Post by MichaelK » Sun Mar 25, 2018 5:05 pm

same here! Printer paused, but only when connected and printing from the PC.
I'am saving the same gcode file onto SD-Card, and printing from sd-card is perfect without pausing.

User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: Printing Pause

Post by MichaelK » Wed Mar 28, 2018 12:58 am

It is not a mistake from gcode, it is possible that is a mistake into the firmware.

I've triad a lot the last few days with printing pause.
With EasyPrint3D the print paused irregular, but with Repetier i found this:

The print start and the nozzle - fan working between 50 and 100%. After 30 minutes, the nozzle fan going suddenly to full speed 100% and the printing stop immediately. You can't do anything, the touch doesn't response and click paused in Repetier didn't do anything.
ONLY if you set down the fan speed in repetier with the slicer from 100% to 90%, the printing goes on.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Printing Pause

Post by William » Thu Mar 29, 2018 7:09 pm

MichaelK wrote:
Wed Mar 28, 2018 12:58 am
It is not a mistake from gcode, it is possible that is a mistake into the firmware.

I've triad a lot the last few days with printing pause.
With EasyPrint3D the print paused irregular, but with Repetier i found this:

The print start and the nozzle - fan working between 50 and 100%. After 30 minutes, the nozzle fan going suddenly to full speed 100% and the printing stop immediately. You can't do anything, the touch doesn't response and click paused in Repetier didn't do anything.
ONLY if you set down the fan speed in repetier with the slicer from 100% to 90%, the printing goes on.
Could you tell us the firmware version of your printer?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: Printing Pause

Post by MichaelK » Thu Mar 29, 2018 10:24 pm

Of course: the display onto my E180 tell me: Version: 1.23.25 and Repetier Version 1.1.0 on macOS said: 1.0.25

khenfalko
Posts: 0
Joined: Sat Oct 14, 2017 7:07 pm

Re: Printing Pause

Post by khenfalko » Fri Apr 13, 2018 1:21 pm

Same problem and I do not find the solution I have tried everything possible the printer pauses several times during a print and you have to manually start it every time impossible to use in this way

Post Reply