Hi
I have problem with filament. Its broken somewhere inside the printer in white tube that leads to nozzle.
How I get it out. Video in YouTube where u replace the nozzle has different nozzle. My printer is bit different.
my printer looks like this.
Filament stuck on printer
Re: Filament stuck on printer
Hi,Do you mean that the consumable is broken in the middle? You can remove the Teflon tube and remove the broken consumable. The nozzle can print normally?
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Filament stuck on printer
Yes its broken inside the teflon tube. So how i remove the teflon tube? Just pull hard or?
Re: Filament stuck on printer
Hi,Remove the connected segment and see if the supplies can be removed.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Filament stuck on printer
So how i remove the teflon tube? Will I pull hard or do I need to do something first?
Re: Filament stuck on printer
Hi,you can try to unscrew the Teflon tube connection position on the motor side
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Filament stuck on printer
Is it possible to remove the teflon tube from nozzle end? Or how I remove the nozzle? Video in youtube has machine that is different than mine.
Re: Filament stuck on printer
Hi,if you use such a nozzle, you can use a tool to remove the nozzle at a temperature of about 200 °.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!