print pause

Post Reply
ReavesCharles
Posts: 1
Joined: Thu Jan 23, 2020 1:55 pm

print pause

Post by ReavesCharles » Thu Jan 23, 2020 1:58 pm

Hello,

Taken a file and done the slice with simplify3d result pauses continue and impossible to continue printing
the same file made with Ultimaker CURA and everything is perfect possible incompatibility of the simplify3d slicer ???
I have done other tests with various files and they do not work well if done with simplify3d while with CURA they work very well

Regards.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: print pause

Post by William » Thu Jan 23, 2020 2:11 pm

:D Hi,if it is like this,
It is recommended to use cura for slicing.
Maybe there is a problem with the gcode in simplify3d, and printing is paused.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply