3d wifi module on E180

Post Reply
deymosdj
Posts: 1
Joined: Mon Nov 26, 2018 5:05 am

3d wifi module on E180

Post by deymosdj » Mon Nov 26, 2018 5:07 am

hi, i have the geeetech e180 and the external wifi module, i cant connect the module to the printer, i connected both together and the module with my phone, but the printer does not do anything, what should i do?

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: 3d wifi module on E180

Post by _kaktus_ » Mon Nov 26, 2018 5:24 am

Hello.
:mrgreen:

Try to present in a more descriptive way which steps you have taken.
Write which version of the module you are using, and provide the application version number.
;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 3d wifi module on E180

Post by William » Wed Nov 28, 2018 11:50 am

Have you tried to set the correct baud rate for it?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply