E180 Firmware Upgrade

Post Reply
BennyBoyW
Posts: 27
Joined: Wed Jan 24, 2018 7:40 pm

E180 Firmware Upgrade

Post by BennyBoyW » Fri Jul 13, 2018 4:46 am

Hi All
Just got an E180 to see what it's like.
Having a problem with the firmware upgrade.
I downloaded latest version of EasyPrint and checked the Firmware version on the printer - it was old so I went for an update.
It's now stuck on "Updating LCD and has been for about an hour with no progress.
Any suggestions ?
Ben

discopants9
Posts: 2
Joined: Fri Jun 22, 2018 2:46 am

Re: E180 Firmware Upgrade

Post by discopants9 » Fri Jul 13, 2018 11:28 pm

Got the same issue today, did yours go ok in the end

discopants9
Posts: 2
Joined: Fri Jun 22, 2018 2:46 am

Re: E180 Firmware Upgrade

Post by discopants9 » Sat Jul 14, 2018 12:45 am

did you find a solution to this as I am having the same issues now

Alex-w
Posts: 148
Joined: Thu Jun 05, 2014 2:24 pm

Re: E180 Firmware Upgrade

Post by Alex-w » Sat Jul 14, 2018 2:34 pm

What's the version of easyprint you downloaded?(If you want the details about the version, please review my instruction showing in Bug report)
You also can choose the smartto tools for your upgrading(https://github.com/Geeetech3D/Smartto-E ... ster/tools)
PM me if you have any questions about these softwares
@discopants9 @BennyBoyW

BennyBoyW
Posts: 27
Joined: Wed Jan 24, 2018 7:40 pm

Re: E180 Firmware Upgrade

Post by BennyBoyW » Sun Jul 15, 2018 7:44 pm

discopants9 wrote:
Fri Jul 13, 2018 11:28 pm
Got the same issue today, did yours go ok in the end
Still working on it - I'll post if I get to the bottom of it

BennyBoyW
Posts: 27
Joined: Wed Jan 24, 2018 7:40 pm

Re: E180 Firmware Upgrade

Post by BennyBoyW » Sun Jul 15, 2018 7:45 pm

sean wrote:
Sat Jul 14, 2018 2:34 pm
What's the version of easyprint you downloaded?(If you want the details about the version, please review my instruction showing in Bug report)
You also can choose the smartto tools for your upgrading(https://github.com/Geeetech3D/Smartto-E ... ster/tools)
PM me if you have any questions about these softwares
@discopants9 @BennyBoyW
Version 1.2.0
I will try out your link to see if I get it sorted out

BennyBoyW
Posts: 27
Joined: Wed Jan 24, 2018 7:40 pm

Re: E180 Firmware Upgrade

Post by BennyBoyW » Sun Jul 15, 2018 8:05 pm

@discopants9
I extracted the toolkit straight to C:\ so it went into a folder called Toolkits
I also made sure the SD card was in the back of the printer
The Toolkit now runs fine

@sean
I ran the toolkit fine and it seemed to upgrade the firmware to 1.35.56
However, then I did an upgrade on the LCD too. The LCD said "Firmware upgrade" and after a while, the printer rebooted.
When it came back, the LCD was completely unresponsive when you pushed the on-screen buttons
I turned the printer off and on again and it's still completely unresponsive to touch
Any ideas ?

BennyBoyW
Posts: 27
Joined: Wed Jan 24, 2018 7:40 pm

Re: E180 Firmware Upgrade

Post by BennyBoyW » Sun Jul 15, 2018 8:10 pm

Hold on - sorted it.
The unresponsive screen was due to the screen not being calibrated
I pressed randomly around and started getting into the menus
With a bit of luck, I found the right menu for screen calibration and managed to work out where it thought the button was
When I recalibrated my screen, the printer menus now work fine and the printer is reporting the correct firmware version

So I'm back in business :D

Now to work out why my Y axis is not moving correctly lol

Alex-w
Posts: 148
Joined: Thu Jun 05, 2014 2:24 pm

Re: E180 Firmware Upgrade

Post by Alex-w » Mon Jul 16, 2018 2:24 pm

BennyBoyW wrote:
Sun Jul 15, 2018 8:10 pm
Hold on - sorted it.
The unresponsive screen was due to the screen not being calibrated
I pressed randomly around and started getting into the menus
With a bit of luck, I found the right menu for screen calibration and managed to work out where it thought the button was
When I recalibrated my screen, the printer menus now work fine and the printer is reporting the correct firmware version

So I'm back in business :D

Now to work out why my Y axis is not moving correctly lol
:lol: Good news.

BennyBoyW
Posts: 27
Joined: Wed Jan 24, 2018 7:40 pm

Re: E180 Firmware Upgrade

Post by BennyBoyW » Tue Jul 17, 2018 9:45 pm

Thanks for all the help guys :)

Post Reply