remove print from bed

Post Reply
rogerio53
Posts: 19
Joined: Mon Jul 09, 2018 4:17 am
Location: Portugal

remove print from bed

Post by rogerio53 » Mon Jul 09, 2018 4:31 am

I have a e180 printer since last friday. An I already ruined two "blue tape".

Please show me the right way to remove my models from bed. I searched internet and found some ideas but all are for heated bed.

Can someone help me, please?

Thank you.

Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: remove print from bed

Post by Gingko » Mon Jul 09, 2018 7:04 pm

If your nozzle is too closed to the bed, and print model sticks too tight it might hard to remove.
Or you can use glue instead of blue tape.

rogerio53
Posts: 19
Joined: Mon Jul 09, 2018 4:17 am
Location: Portugal

Re: remove print from bed

Post by rogerio53 » Tue Jul 10, 2018 5:04 pm

Thank you for your answer.

What type of glue should I use? Directelly over bed?

Thank you.

User avatar
MichaelK
Posts: 43
Joined: Thu Mar 22, 2018 5:20 pm
Location: Germany

Re: remove print from bed

Post by MichaelK » Wed Jul 11, 2018 3:27 am

You can use a glue stick over the Bluetape. You can use painter crepe too.
Don't print onto the bed directly!

rogerio53
Posts: 19
Joined: Mon Jul 09, 2018 4:17 am
Location: Portugal

Re: remove print from bed

Post by rogerio53 » Wed Jul 11, 2018 2:50 pm

Thank you.

Post Reply