Printer Setting for EasyPrint3D

Post Reply
PantherMadCat
Posts: 0
Joined: Fri Mar 25, 2016 4:10 am

Printer Setting for EasyPrint3D

Post by PantherMadCat » Sun Jan 14, 2018 8:00 pm

Hello there,

on the SD Card are two GCode Files (cat and dog), which were included with the E180 printer.
The printing out this 2 files has very good quality.

Can you provide the printer setting as e.g. *.ini-file for the slicer, which were used for creating this 2 gcode-files (cat and dog)?
In EasyPrint3D (Ver 1.1.7) are 3 setting tabs, where I can change many settings. There is no documentation of right settings, which the E180 can handle.

Regards,
Andreas

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Printer Setting for EasyPrint3D

Post by William » Wed Jan 17, 2018 8:06 pm

Now I'm back home, tomorrow I will upload this profile
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Michal M
Posts: 0
Joined: Mon Feb 19, 2018 3:56 am

Re: Printer Setting for EasyPrint3D

Post by Michal M » Wed Feb 21, 2018 1:29 am

I'm also interested - any update ?

sectorbob
Posts: 0
Joined: Tue Jan 16, 2018 8:47 am

Re: Printer Setting for EasyPrint3D

Post by sectorbob » Sat Mar 03, 2018 6:32 pm

Get the Cura settings here

https://howchoo.com/g/mjbmmgmxymn/using ... 3d-printer

hope this helps :)

Inovatech
Posts: 0
Joined: Fri Mar 16, 2018 11:13 pm

Re: Printer Setting for EasyPrint3D

Post by Inovatech » Sat Mar 24, 2018 9:45 pm

No - it doesn´t help!

"The Printer is not connected" - but the printer IS connected. While starting Cura the E180 restarts (ergo: Communication is etablished)
in the how-to there is no information about which type of printer is set.

keoni
Posts: 1
Joined: Sun Oct 21, 2018 1:30 pm

Re: Printer Setting for EasyPrint3D

Post by keoni » Sun Oct 21, 2018 1:58 pm

does anyone has the profile for EasyPrint3d?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Printer Setting for EasyPrint3D

Post by William » Sat Oct 27, 2018 2:09 pm

keoni wrote:
Sun Oct 21, 2018 1:58 pm
does anyone has the profile for EasyPrint3d?
For which printer?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply