Azteeg 3D printer controller

Post Reply
felixoyer
Posts: 2
Joined: Sun Jul 24, 2016 4:59 am

Azteeg 3D printer controller

Post by felixoyer » Sun Jul 24, 2016 5:07 am

Hello,

I have heard about your new product Azteeg 3D printer controller recently. What features does it offer for the users? Would you please explain its advantage?

Thanks in advance :)


Felix
Last edited by felixoyer on Thu Sep 29, 2016 8:25 pm, edited 1 time in total.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Azteeg 3D printer controller

Post by William » Mon Jul 25, 2016 5:51 pm

felixoyer wrote:Hello,

I have heard about your new product Azteeg 3D printer controller recently. What features does it offer for the users? Would you please explain its advantage?

Thanks in advance :)
Hi,
The features:
Compatible with Sprinter, Marlin, Repetier, others.
High current capacity connectors and PCB traces.
Mosfet control for 1 extruder and 1 hotbed
Extra PWM control for small fan or LEDs
3 end stops and 2 thermistor inputs
Fast acting blade fuse
Both right angle and vertical connector sets included
Lots of LEDs, PWR, hot end and hot bed

Advantage:
The Azteeg is based on Sanguino/Sanguinololu and is compatible with most Arduino based firmware(Sprinter,Marlin,Repetier, plus others.). It is pin to pin compatible with the Sanguinololu with the addition of a FAN PIN. The Azteeg features mostly SMT parts to ease production and reduce cost.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

felixoyer
Posts: 2
Joined: Sun Jul 24, 2016 4:59 am

Re: Azteeg 3D printer controller

Post by felixoyer » Wed Jul 27, 2016 1:21 am

Hey William,

Thank you for your response and for sharing the complete features about Azteeg. But, I would like to know about whether I will have issues with the continuous use or when it gets hotter. Because, I will have continuous usage of it.

Thanks for help :)

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Azteeg 3D printer controller

Post by William » Thu Jul 28, 2016 7:04 pm

felixoyer wrote:Hey William,

Thank you for your response and for sharing the complete features about Azteeg. But, I would like to know about whether I will have issues with the continuous use or when it gets hotter. Because, I will have continuous usage of it.

Thanks for help :)
Hi,
The board is so old that i know about a little about it...You can contact our sales(sales@geeetech.com) for more info if you're interested in.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Fariaj3
Posts: 1
Joined: Wed Sep 26, 2018 4:53 pm

Re: Azteeg 3D printer controller

Post by Fariaj3 » Wed Sep 26, 2018 5:03 pm

I know Geeetech reliability but at this time my friend suggests me to check your product. I need a 3D print controller, so I decide to check their reliability or product. I need all information or configuration for that product. Please let me know the contact methods so that I can buy this product.

Thanks

Fariaj3

Post Reply