Need help 1st time print

Post Reply
StarLog
Posts: 10
Joined: Sat Sep 19, 2020 1:23 am

Need help 1st time print

Post by StarLog » Sun Sep 20, 2020 3:24 am

So, this is my first print, and I have no idea why this happened.

Can someone tell me what needs adjusting and why it happened.?

https://ibb.co/N36yd8C

Also after cooling off, the model will not come off the table.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Need help 1st time print

Post by William » Mon Sep 21, 2020 4:22 pm

Hello, are you M series or T series printer? Whether the other extruder also put consumables, this is the test file printed by the dual extruder, you may not put consumables.
Regards.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

StarLog
Posts: 10
Joined: Sat Sep 19, 2020 1:23 am

Re: Need help 1st time print

Post by StarLog » Tue Sep 22, 2020 7:17 pm

Thanks for the reply.

This is A10M

I used one roll of filament, on E1.

The issue is I printed again and the same problem. The top of the DOG is garbage.

myles_17
Posts: 2
Joined: Fri Oct 09, 2020 10:33 pm

Re: Need help 1st time print

Post by myles_17 » Sat Oct 10, 2020 10:19 pm

I had the same issue.

Post Reply