Help with new A30T

Post Reply
jflaws
Posts: 2
Joined: Wed Aug 05, 2020 10:23 pm

Help with new A30T

Post by jflaws » Thu Aug 27, 2020 10:58 pm

Assembly of unit was no problem, but went to level the bed. when I select manual control nothing will happen. If I hit "Home" the Y stage moves until it hits the limit switch in the back then it will not do any moves. No Manual control in any direction, checked the limit switch it seems to work ok, not sure what to do from here, is there a support # or can someone call me? 865-384-1943

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Help with new A30T

Post by William » Fri Aug 28, 2020 1:49 pm

Hello,
1. You can check whether the y-axis stopper is properly connected.
2. You can test whether the endstop works normally.
http://geeetech.com/forum/viewtopic.php?f=17&t=60927
3. You can exchange the drive of the y-axis and other axes to see if it is a drive problem. :D
Attachments
15.jpg
15.jpg (55.44 KiB) Viewed 15173 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

3dprintr
Posts: 1
Joined: Sat Sep 05, 2020 1:33 am

Re: Help with new A30T

Post by 3dprintr » Sat Sep 05, 2020 1:39 am

My prints have been coming out weird, some prints come out unfinished, and there is major stringing happening.

martyray
Posts: 10
Joined: Tue Sep 01, 2020 1:02 pm

Re: Help with new A30T

Post by martyray » Sat Sep 19, 2020 6:50 pm

that's interesting .
im getting a few unfinished prints as well.
single colour no problems.
multi colour finishes before pint in complete

KriKri854
Posts: 15
Joined: Wed Apr 08, 2020 10:00 pm

Re: Help with new A30T

Post by KriKri854 » Wed Sep 23, 2020 3:56 pm

Hello, I've also trouble with multicolour.
I've read a long while ago someboday had made a online tool to modify colors in gcode but I can't find it anymore. Anybody?
Thx.
The mixing tool from geeetech shuts down each time.

annaph
Posts: 1
Joined: Sat Sep 26, 2020 3:25 pm

Re: Help with new A30T

Post by annaph » Sat Sep 26, 2020 3:27 pm

William wrote:
Fri Aug 28, 2020 1:49 pm
Hello,
1. You can check whether the y-axis stopper is properly connected.
2. You can test whether the endstop works normally.
http://geeetech.com/forum/viewtopic.php?f=17&t=60927
3. You can exchange the drive of the y-axis and other axes to see if it is a drive problem. :D
Thankyou so much this was very helful

NoahGreat
Posts: 1
Joined: Tue Nov 10, 2020 8:43 pm

Re: Help with new A30T

Post by NoahGreat » Tue Nov 10, 2020 9:21 pm

William wrote:
Fri Aug 28, 2020 1:49 pm
Hello,
1. You can check whether the y-axis stopper is properly connected.
2. You can test whether the endstop works normally.
http://geeetech.com/forum/worktime/viewtopic.php?f=17&t=60927
3. You can exchange the drive of the y-axis and other axes to see if it is a drive problem. :D
Thank You!

Post Reply