What do I need to change in the firmware for the 3dTouch sensor to work with i3 ProW? I have read the instructions for other printers but they seem to vary a bit so I want to make sure I have the correct settings in the firmware for my printer. I have the GT2560 A+ board.
Thanks!!
i3 ProW settings for 3DTouch sensor
Re: i3 ProW settings for 3DTouch sensor
You can refer to the post and read the user manual of 3d touch. The manual can help you to change the firmware for your printer.
viewtopic.php?f=27&t=18263
viewtopic.php?f=27&t=18263
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: i3 ProW settings for 3DTouch sensor
I see the info but I do not see anything about the Pro W. I see B, C, and X but not W. I don’t want to mess up my board since I can not find exact firmware for Pro W.
Thanks
Thanks
Re: i3 ProW settings for 3DTouch sensor
My 3D Printer
I3 pro W
and
board GT2560
can i Inductive Proximity Sensor for auto leveling
https://www.aliexpress.com/item/M12-4mm ... 72092.html
please locate firmare
I3 pro W
and
board GT2560
can i Inductive Proximity Sensor for auto leveling
https://www.aliexpress.com/item/M12-4mm ... 72092.html
please locate firmare