M211 S0 Not working.

Post Reply
156801
Posts: 5
Joined: Tue May 29, 2018 1:57 pm

M211 S0 Not working.

Post by 156801 » Tue May 29, 2018 6:31 pm

Hi,

I installed a BL Touch and was trying to set the offset on the z axis s by using the M211 S0 command to disable the soft end stop.

For some reason this command does not work the board is a gt2560 on a geeetech I3 Pro B W.

Any help would be appreciated.

Robert

Gingko
Posts: 41
Joined: Tue Apr 24, 2018 10:43 am

Re: M211 S0 Not working.

Post by Gingko » Wed May 30, 2018 3:16 pm

Hi,
Seems that marlin doesn't support "M211" code.
I guess you can set z offset directly by M851.
Attachments
1.png
1.png (12.2 KiB) Viewed 311 times
3.jpg
3.jpg (103.31 KiB) Viewed 311 times

156801
Posts: 5
Joined: Tue May 29, 2018 1:57 pm

Re: M211 S0 Not working.

Post by 156801 » Fri Jun 01, 2018 4:31 pm

Was using Repetier which I found out does not support turning off the soft endstop.

I tried Easyprint 3D and worked no problems.

Thanks for the help.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest