Upgrade Firmware with easy print

SSAL
Posts: 4
Joined: Sun Apr 02, 2017 5:24 pm

Re: Upgrade Firmware with easy print

Post by SSAL » Sun Apr 16, 2017 3:52 pm

Hi,
with the M201 it is not working!!!!
You go always back to the old version.
By the way, where I can find the V1.0.5 for the M201 Board?

Greetings

SSAL

SSAL
Posts: 4
Joined: Sun Apr 02, 2017 5:24 pm

Re: Upgrade Firmware with easy print

Post by SSAL » Sun Apr 16, 2017 3:57 pm

Hi,
maybe this is also interesting:
download/file.php?id=3221

stuartplab
Posts: 3
Joined: Tue Aug 08, 2017 2:52 pm
Contact:

Re: Upgrade Firmware with easy print

Post by stuartplab » Tue Aug 08, 2017 5:11 pm

Did you problem solved or is it still there? I'm willing to help as I found some good tutorials on https://www.saitekaudio.com/ .

Cheers,
Staurt.
Last edited by stuartplab on Mon Apr 02, 2018 5:51 pm, edited 1 time in total.

User avatar
Alep
Posts: 3
Joined: Mon Sep 19, 2016 1:07 am
Location: Italy
Contact:

Re:Italian Message for EasyPrint Version 1.1.7

Post by Alep » Sun Jan 14, 2018 2:15 am

This is the link for the my italian translate of EasyPrint version 1.1.7 message file

http:/www.pittaluga.net/it.zip

Put it on the directory C:\Program Files (x86)\EasyPrint 3D\data\translations

User avatar
William
Site Admin
Posts: 2641
Joined: Tue Jun 07, 2016 9:38 am

Re: Re:Italian Message for EasyPrint Version 1.1.7

Post by William » Mon Jan 15, 2018 7:56 pm

Alep wrote:
Sun Jan 14, 2018 2:15 am
This is the link for the my italian translate of EasyPrint version 1.1.7 message file

http:/www.pittaluga.net/it.zip

Put it on the directory C:\Program Files (x86)\EasyPrint 3D\data\translations
Thanks very much!
Amazing 3D printing world

BR365
Posts: 6
Joined: Mon Apr 16, 2018 7:24 pm

Re: Upgrade Firmware with easy print

Post by BR365 » Sun Apr 22, 2018 11:03 pm

Is it necessary or recommended to start the Printers PSU for the firmware upgrade, too? Or is it enough to connect the USB, because the USB 5V power does already start the Arduino board. I guess, the PSU is only to power the Printer hardware like steppers and heating of bed and extruders.

User avatar
_kaktus_
Site Admin
Posts: 365
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Upgrade Firmware with easy print

Post by _kaktus_ » Mon Apr 23, 2018 9:44 pm

[quote=BR365 post_id=83865 time=1524409435 user_id=65265]
Is it necessary or recommended to start the Printers PSU for the firmware upgrade, too? Or is it enough to connect the USB, because the USB 5V power does already start the Arduino board. I guess, the PSU is only to power the Printer hardware like steppers and heating of bed and extruders.
[/quote]

Which type of printer you are writing.
The individual models have a different construction.

BR365
Posts: 6
Joined: Mon Apr 16, 2018 7:24 pm

Re: Upgrade Firmware with easy print

Post by BR365 » Tue Apr 24, 2018 8:03 pm

[quote=_kaktus_ post_id=83878 time=1524491076 user_id=62475]
[quote=BR365 post_id=83865 time=1524409435 user_id=65265]
Is it necessary or recommended to start the Printers PSU for the firmware upgrade, too? Or is it enough to connect the USB, because the USB 5V power does already start the Arduino board. I guess, the PSU is only to power the Printer hardware like steppers and heating of bed and extruders.
[/quote]
Which type of printer you are writing.
The individual models have a different construction.
[/quote]

The model is a Geeetech I3 Pro C. The firmware update didn't work with EasyPrint 1.1.7 but it worked with the old beta version of EasyPrint.

With EasyPrint 1.1.7 the new available firmware (1.0.04) was displayed, when I connect the printer, but 1.1.7 seems not to be able to download the firmware file. Therefore, the update process didn't start.

With the old beta version, the firmware is loaded successfully and the progress bar becomes green.

Kibo
Posts: 6
Joined: Thu May 31, 2018 4:52 pm

Re: Upgrade Firmware with easy print

Post by Kibo » Thu May 31, 2018 10:10 pm

[quote=BR365 post_id=83895 time=1524571382 user_id=65265]
[quote=_kaktus_ post_id=83878 time=1524491076 user_id=62475]
[quote=BR365 post_id=83865 time=1524409435 user_id=65265]
Is it necessary or recommended to start the Printers PSU for the firmware upgrade, too? Or is it enough to connect the USB, because the USB 5V power does already start the Arduino board. I guess, the PSU is only to power the Printer hardware like steppers and heating of bed and extruders.
[/quote]
Which type of printer you are writing.
The individual models have a different construction.
[/quote]

The model is a Geeetech I3 Pro C. The firmware update didn't work with EasyPrint 1.1.7 but it worked with the old beta version of EasyPrint.

With EasyPrint 1.1.7 the new available firmware (1.0.04) was displayed, when I connect the printer, but 1.1.7 seems not to be able to download the firmware file. Therefore, the update process didn't start.

With the old beta version, the firmware is loaded successfully and the progress bar becomes green.
[/quote]

Same here. With EasyPrint 1.1.7 nothing happens. Do I really need to downgrade EasyPrint??

Kibo
Posts: 6
Joined: Thu May 31, 2018 4:52 pm

Re: Upgrade Firmware with easy print

Post by Kibo » Thu May 31, 2018 10:23 pm

I just found out:

To update the firmware, I had to set the Baudrate to 256000. Otherwise the loading bar doesn´t move.
To connect to the printer, I had to set it to 250000.

Now it worked.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest