command waiting

Post Reply
alex.abate
Posts: 0
Joined: Mon Nov 27, 2017 2:42 am

command waiting

Post by alex.abate » Mon Nov 27, 2017 3:04 am

Hi, I started printing using repetier hosts and everything was fine, half of a job started to give error messages and after the printer give the message "command waiting" and doesn't move. I try to replace the firmware but nothing change.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: command waiting

Post by William » Mon Nov 27, 2017 11:59 am

Perhaps the reason for the USB cable, you can try to print with an SD card to see if the issue is solved.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

alex.abate
Posts: 0
Joined: Mon Nov 27, 2017 2:42 am

Re: command waiting

Post by alex.abate » Wed Nov 29, 2017 5:03 am

thanks William I'll try. Now the new thing is that the machine, after waiting message, loose the heating plate and the second extruder temperature is 100°C without command.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: command waiting

Post by William » Thu Nov 30, 2017 6:44 pm

Could you upload pictures of the wiring of mainboard?I also need to confirm what is displayed on the monitor.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

alex.abate
Posts: 0
Joined: Mon Nov 27, 2017 2:42 am

Re: command waiting

Post by alex.abate » Fri Dec 01, 2017 5:16 am

Hi, I print from SD and everything works right. still the problem with PC.
How can upload an image?
thanks

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: command waiting

Post by Admin » Fri Dec 01, 2017 12:01 pm

I think there may be the COM port is occupied in the middle of printing, of course, may also because of the USB cable and the interface.

Post Reply