I3 PRO W Z axis move wrong

Post Reply
dang
Posts: 3
Joined: Sun Mar 07, 2021 1:15 am

I3 PRO W Z axis move wrong

Post by dang » Fri Mar 19, 2021 8:20 am

Hi,
I just bought a new geeetch I3 Pro W and I follow instruction when update the FW and changing setting in Marlin /Arduino. I can home all axes and go in "prepare" submenu to movings axes I choose 1mm step and X and Y are moving the right travel distance.. BUT Z axis is much bigger travel than 1mm !!! How to fix that ? Instead of moving up 1 mm the travel distance is 6mm...
Dang

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: I3 PRO W Z axis move wrong

Post by Admin » Fri Mar 19, 2021 11:52 am

Hello, please check the step value of the z-axis, it may be too large and can be adjusted.
If you still have any questions, please contact geeetech official, you can contact geeetech through ticket.
Attachments
ticket process.rar
(389.76 KiB) Downloaded 242 times

Post Reply