Mecreator2 - how to tighten the X belt?

Post Reply
redirect303
Posts: 16
Joined: Sat Jun 29, 2019 2:34 am

Mecreator2 - how to tighten the X belt?

Post by redirect303 » Sat Jul 06, 2019 5:04 am

I'm having some issues with the X-belt. It seemed a bit loose from the beginning, but only after few small test prints it became loose enough to induce layer misalignment.

I see the belt has no tensioner on it and I don't know how to tension it. Do I have to remove the entire printing head? A tutorial or a diagram, or a video showing this process would be welcome.

Thanks.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Mecreator2 - how to tighten the X belt?

Post by William » Sat Jul 06, 2019 9:35 am

Hi, thanks for your feedback. You can try to remove it and adjust it to the proper tightness before installing it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply