Hello,
have an Prusia i3 Pro C Dual Extruder with an MK3 hedbed updatet are the Heating from bed ist very slow.
The board is an GT2560 any have an idea?
Pro C MK3 Hedbed heating Slow
Re: Pro C MK3 Hedbed heating Slow
hi, pelase tell me the specification of the MK3.handyfreax wrote:Hello,
have an Prusia i3 Pro C Dual Extruder with an MK3 hedbed updatet are the Heating from bed ist very slow.
The board is an GT2560 any have an idea?
-
- Posts: 3
- Joined: Thu Feb 25, 2016 5:26 am
Re: Pro C MK3 Hedbed heating Slow
the heatbed for the I3 pro C is 96W, yours is 115-144, maybe too high for the PSU...and is your heatbed resistance too big?
-
- Posts: 3
- Joined: Thu Feb 25, 2016 5:26 am
Re: Pro C MK3 Hedbed heating Slow
i have the standard resistance from the Original hedbed.
what an resistance is god?
what an resistance is god?
Re: Pro C MK3 Hedbed heating Slow
according to Ohm's law, P=I*U=U*U/R, then you can konw the theoretical resistance. I too high or too low will affect the temperatures.
Also you can find a more powerful PSU to verify whether the power is enough or not.
Also you can find a more powerful PSU to verify whether the power is enough or not.