lcd 2004

Post Reply
p47r1ck
Posts: 0
Joined: Thu Jan 11, 2018 12:14 am

lcd 2004

Post by p47r1ck » Thu Jan 11, 2018 12:29 am

Hi, I followed the guide:
on the mainboard the multimeter marks 8V, I inverted the flat LCD and SD and updated the firmware but I still have the problem that the first two lines halfway are readable and in the rest of the screen or lines, I can not upload images to show you

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: lcd 2004

Post by William » Thu Jan 11, 2018 5:39 pm

Is it possible to control the printer via USB? If you can, then it may be LCD cable was broken or the LCD itself was broken
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

p47r1ck
Posts: 0
Joined: Thu Jan 11, 2018 12:14 am

Re: lcd 2004

Post by p47r1ck » Fri Jan 12, 2018 12:05 am

Yes, via USB works, I printed the box for rasperry pi 3 without problems

Post Reply