LCD geetech i3 C prusa

Post Reply
gpau
Posts: 50
Joined: Wed Nov 30, 2016 5:35 pm

LCD geetech i3 C prusa

Post by gpau » Wed Oct 18, 2017 8:43 pm

How do you see the second extruder on the display, I leave the Z with numbers, see photos.
Thank you

https://postimg.org/image/3ld4baz6l7/

User avatar
William
Site Admin
Posts: 4208
Joined: Tue Jun 07, 2016 9:38 am

Re: LCD geetech i3 C prusa

Post by William » Thu Oct 19, 2017 1:59 pm

As far as I know, it's normal that the LCD shows.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

gpau
Posts: 50
Joined: Wed Nov 30, 2016 5:35 pm

Re: LCD geetech i3 C prusa

Post by gpau » Tue Dec 05, 2017 3:35 pm

I just replaced the gt2560 card, with the other the display goes off

User avatar
William
Site Admin
Posts: 4208
Joined: Tue Jun 07, 2016 9:38 am

Re: LCD geetech i3 C prusa

Post by William » Tue Dec 05, 2017 5:17 pm

Have you rechecked the wiring? Is the wiring correct?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

gpau
Posts: 50
Joined: Wed Nov 30, 2016 5:35 pm

Re: LCD geetech i3 C prusa

Post by gpau » Wed Dec 06, 2017 4:19 am

yes,everything is correct, otherwise it would not work

User avatar
William
Site Admin
Posts: 4208
Joined: Tue Jun 07, 2016 9:38 am

Re: LCD geetech i3 C prusa

Post by William » Wed Dec 06, 2017 5:26 pm

The voltage of here is 5V?
VVVVVVVVVVVVVVVVVV.png
VVVVVVVVVVVVVVVVVV.png (1.57 MiB) Viewed 2764 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest