LCD Display showing backlight and nothing else

[IdioticAussie]

Hello all,

When I uploaded the code to my G2S all that appeared on my LCD screen was the backlight. No rectangles, no display, nothing, just the light. Any suggestions?

Regards
IdioticAussie

[Mark]

You can adjust the screw of the LCD controller to see if it works.
Or you have plugged the LCD wire to the SD outlet, try to swap them .

[IdioticAussie]

You can adjust the screw of the LCD controller to see if it works.
Or you have plugged the LCD wire to the SD outlet, try to swap them .

Thank you very much, that fixed the problem