LCD 12864 with GT2560

Raisa
Posts: 7
Joined: Fri Feb 12, 2016 4:12 pm

Re: LCD 12864 with GT2560

Post by Raisa » Sat Feb 13, 2016 4:40 am

PS: rmrodriges ... this is also appearently your Problem with the Display as well, please check it yourself before modifying it with your multimeter... :)
Hopefully this helps you!

rmrodrigues
Posts: 36
Joined: Wed Oct 14, 2015 5:37 am

Re: LCD 12864 with GT2560

Post by rmrodrigues » Wed Feb 17, 2016 5:31 pm

Yep. it should be the same problem because the vendor is the same.
Did you change the connectors position? Could you post some photos please?

Many thanks.

RMRodrigues.

Raisa
Posts: 7
Joined: Fri Feb 12, 2016 4:12 pm

Re: LCD 12864 with GT2560

Post by Raisa » Thu Feb 18, 2016 6:05 pm

Hello again,
Yes, for the LCD12864 from bigtree-tech the connectors should have been mounted 180° turned, but here I have a modification.
All you have to do is just to turn the cable connectors 180°.

Still, please do the checks with a multi meter before retrying, I take no responsibility if it is not working for everyone !!
Be warned and measure first before damaging your equipment . :)
I just know it worked out for me and with the bigtree-tech LCD12864...
In the attachment is a small image, which might help...

Best regards,
Raisa
Attachments
Mod_LCD12864_bigtree2.jpg
Modification... do at your own risk !
Mod_LCD12864_bigtree2.jpg (291.36 KiB) Viewed 8367 times

rmrodrigues
Posts: 36
Joined: Wed Oct 14, 2015 5:37 am

Re: LCD 12864 with GT2560

Post by rmrodrigues » Sun Feb 21, 2016 12:18 am

Hi there,
As Raisa suggested me, I've turned the connector 180 degress and it's working fine now.

Many thanks Raisa.

Cheers.
RMRodrigues.

Raisa
Posts: 7
Joined: Fri Feb 12, 2016 4:12 pm

Re: LCD 12864 with GT2560

Post by Raisa » Mon Feb 22, 2016 9:55 pm

Hello,

has been a pleasure to help ;)

shiva
Posts: 48
Joined: Sat Jun 13, 2015 2:51 am

Re: LCD 12864 with GT2560

Post by shiva » Mon Dec 05, 2016 2:55 pm

Hi Raisa
i am getting same problem.Please let me know should i cut all the wires and rotate 180digree connection ? or cut and swap frist pin and last pin?

thanks
Shiva

shiva
Posts: 48
Joined: Sat Jun 13, 2015 2:51 am

Re: LCD 12864 with GT2560

Post by shiva » Wed Dec 07, 2016 12:14 pm

Thanks Raisa,
I have done it,Started working

Scooby
Posts: 3
Joined: Wed Apr 26, 2017 11:27 pm

Re: LCD 12864 with GT2560

Post by Scooby » Thu Jun 01, 2017 12:40 am

Hi All

I am having the same problem a blank screen and a red led number D8 by the heater 2 connection on my GT2560. I know it is an old thread but if any one can help I really do need it,,, ;)

User avatar
William
Site Admin
Posts: 3555
Joined: Tue Jun 07, 2016 9:38 am

Re: LCD 12864 with GT2560

Post by William » Thu Jun 01, 2017 2:49 pm

Scooby wrote:Hi All

I am having the same problem a blank screen and a red led number D8 by the heater 2 connection on my GT2560. I know it is an old thread but if any one can help I really do need it,,, ;)
Could you post some pictures showing the details?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

TheDuke99
Posts: 1
Joined: Tue Aug 22, 2017 12:59 am

Re: LCD 12864 with GT2560

Post by TheDuke99 » Tue Aug 22, 2017 1:05 am

Thanks to everyone who cleared up the reversed pins issue, solved my issue with the Big Tree board.

Thanks!

Mike
Chattanooga, TN

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest