i3 Acrylic pro B; impossible to mount motor on bed

Post Reply
websmr
Posts: 10
Joined: Wed Sep 14, 2016 1:25 am

i3 Acrylic pro B; impossible to mount motor on bed

Post by websmr » Sat Oct 08, 2016 6:32 pm

Hi,

I'm having an issue with the asssembly of the first nema 17 on the bed side, on the pages 19 and 20 of the manual instrution of the i3 acrylic pro B it say the mount the acrylic part A13 on the motor and later mount it on the platform with M3 x16 screw.

The problem is, there's 155mm betwen the acrylic parts and the screw is only 16mm so its impossible to assembly correctly

Here's a picture of the problem:

http://i64.tinypic.com/2upwi91.jpg

Can you tell me what's happening?

Toy
Site Admin
Posts: 116
Joined: Mon May 16, 2016 8:40 am

Re: i3 Acrylic pro B; impossible to mount motor on bed

Post by Toy » Sun Oct 09, 2016 10:37 am

Which part is 155mm?
In the instructions you can see you need to use M3X20 screws not M3X16.
1009.png
1009.png (3.15 KiB) Viewed 3937 times

websmr
Posts: 10
Joined: Wed Sep 14, 2016 1:25 am

Re: i3 Acrylic pro B; impossible to mount motor on bed

Post by websmr » Sun Oct 09, 2016 6:33 pm

15.5mm sorry, forgot the ","


And finnally that's the problem...instructions are wrong...

It clearly say M3 x16 on the requierements on the page 17, and later in page 18 like you said it says M3x 20...
Attachments
Captura.PNG
Captura.PNG (85.25 KiB) Viewed 3923 times

User avatar
William
Site Admin
Posts: 6320
Joined: Tue Jun 07, 2016 9:38 am

Re: i3 Acrylic pro B; impossible to mount motor on bed

Post by William » Mon Oct 10, 2016 11:57 am

Yep,i found it too.It should be M3*16.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests