For people who wants STL files of parts

Buzz
Posts: 31
Joined: Thu Jul 09, 2015 7:59 am

Re: For people who wants STL files of parts

Post by Buzz » Thu Jul 09, 2015 6:19 pm

Thank you for the attention and fast response, Eric.

leo
Posts: 1
Joined: Wed Jul 15, 2015 5:01 am

Re: For people who wants STL files of parts

Post by leo » Wed Jul 15, 2015 5:05 am

I purchased your dual extruder and am installing it on a Prusa i3 printer. The dual extruder holder stl file does not fit the dual extruder I purchased. You have no heatsinks and one fan on the extruder provided with your pro c printer kit but the dual extruder you sell separately has 2 heatsinks and two fans so it won't fit the holder. Is it ok to install without the heatsinks? Why 2 different versions of the same thing? No stl file for a holder that will fit mine?

Thanks

The3DStudent
Posts: 12
Joined: Wed Jun 17, 2015 9:24 am

Re: For people who wants STL files of parts

Post by The3DStudent » Wed Jul 15, 2015 6:25 am

Are the printed parts (stl files) for the Prusa i3 pro C the same as the i3 B? I realize the dual extruder mount is already listed separately, but I do not see a listing for the other i3 C parts. If they are not the same could you please post them or send them in an email?

On another note, this thread is not the easiest thing to find and does not appear when searching the forums for "stl". Perhaps you could put a link to this thread in the build instructions or on the webpage for each of these printers. A better solution would be to add a "downloads" section to your main page or to each printer's webpage; in this section you could provide stl files as well as firmware files saving everyone a great deal of time.

the3dstudent@gmail.com

Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: For people who wants STL files of parts

Post by Sherry » Wed Jul 15, 2015 4:39 pm

leo wrote:I purchased your dual extruder and am installing it on a Prusa i3 printer. The dual extruder holder stl file does not fit the dual extruder I purchased. You have no heatsinks and one fan on the extruder provided with your pro c printer kit but the dual extruder you sell separately has 2 heatsinks and two fans so it won't fit the holder. Is it ok to install without the heatsinks? Why 2 different versions of the same thing? No stl file for a holder that will fit mine?

Thanks
hi,could you take a picture of you new dual extruder and heat sink?

Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: For people who wants STL files of parts

Post by Sherry » Wed Jul 15, 2015 5:00 pm

hi,these stl files are the same,could you please take a picture of "mount" and "thread" in the review.i'm not sure whict part you describe.thx.

The3DStudent
Posts: 12
Joined: Wed Jun 17, 2015 9:24 am

Re: For people who wants STL files of parts

Post by The3DStudent » Thu Jul 16, 2015 1:24 pm

"Thread" == forum topic/question and all associated replies

Which stl files are for the Prusa i3 pro C with dual mk8 extruders(see link below)?
http://www.geeetech.com/unassembledgeee ... p-927.html

plee1024
Posts: 3
Joined: Sat Nov 07, 2015 7:45 am

Re: For people who wants STL files of parts

Post by plee1024 » Wed Dec 09, 2015 3:40 am

Are the i3x .STL parts availabe?

Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: For people who wants STL files of parts

Post by Mark » Wed Dec 09, 2015 2:03 pm

I3 X have no printed plastic parts so there's no stl files for it.

chase
Posts: 32
Joined: Sat Jul 16, 2016 10:57 pm

Re: For people who wants STL files of parts

Post by chase » Fri Jul 22, 2016 2:04 am

Hi,

Which if any of the above be for an 8mm Acrylic i3 Pro B and C?

tia

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: For people who wants STL files of parts

Post by William » Fri Jul 22, 2016 10:17 am

chase wrote:Hi,

Which if any of the above be for an 8mm Acrylic i3 Pro B and C?

tia
Hi,
What your "8mm" means?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply