Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post Reply
neonshamanic
Posts: 6
Joined: Tue Oct 01, 2019 4:56 pm

Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by neonshamanic » Wed Oct 02, 2019 5:06 pm

I have the Duplicator 5 dual extruder mk8 but the extruder works in the wrong direction!

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by Admin » Sat Oct 05, 2019 11:44 am

To help you better, we hope you can provide a video to illustrate your problem.

neonshamanic
Posts: 6
Joined: Tue Oct 01, 2019 4:56 pm

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by neonshamanic » Mon Oct 07, 2019 7:39 pm

the filament wheel is going at the wrong direction ... normali it should push into the extruder, but when i push it trought it comes back out.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by William » Tue Oct 08, 2019 9:03 am

Hi, You can check the direction of your extruder motor.
If it is reversed, it may be necessary to change its direction of operation.
You can provide specific videos so that we can solve the problem better.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

neonshamanic
Posts: 6
Joined: Tue Oct 01, 2019 4:56 pm

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by neonshamanic » Tue Oct 08, 2019 10:11 pm

[img]c:\users\Jue\Documents\VID_20191008_160617.mp4[/img]

neonshamanic
Posts: 6
Joined: Tue Oct 01, 2019 4:56 pm

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by neonshamanic » Wed Oct 09, 2019 9:29 pm

neonshamanic wrote:
Tue Oct 08, 2019 10:11 pm
[img]c:\users\Jue\Documents\VID_20191008_160617.mp4[/img]
how do i send a video please

neonshamanic
Posts: 6
Joined: Tue Oct 01, 2019 4:56 pm

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by neonshamanic » Wed Oct 09, 2019 9:36 pm

William wrote:
Tue Oct 08, 2019 9:03 am
Hi, You can check the direction of your extruder motor.
If it is reversed, it may be necessary to change its direction of operation.
You can provide specific videos so that we can solve the problem better.
how do i send a video here please ?

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by _kaktus_ » Sat Oct 12, 2019 8:11 pm

Hello.
:mrgreen:

To share the video, use an external service and share a link.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

neonshamanic
Posts: 6
Joined: Tue Oct 01, 2019 4:56 pm

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by neonshamanic » Wed Oct 23, 2019 5:00 pm

_kaktus_ wrote:
Sat Oct 12, 2019 8:11 pm
Hello.
:mrgreen:

To share the video, use an external service and share a link.

https://youtu.be/ztN22HPXZbQ

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geetech Duplicator 5 extruder inverted, how can i fix this problem

Post by William » Wed Oct 23, 2019 5:18 pm

Hi, for changes to the direction of operation of the motor,
you can refer to this: http://www.geeetech.com/forum/viewtopic ... 17&t=17037
I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply