New 2017 firmware for rostock 301 ?

User avatar
William
Site Admin
Posts: 4614
Joined: Tue Jun 07, 2016 9:38 am

Re: New 2017 firmware for rostock 301 ?

Post by William » Mon Oct 30, 2017 6:04 pm

You can download the firmware I attached and you can up to the temp to above 220 degrees and the max temp is 270.
gtm32_machine_delta.zip
(64.11 KiB) Downloaded 291 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

JohnQuix
Posts: 36
Joined: Mon Aug 01, 2016 8:20 pm

Re: New 2017 firmware for rostock 301 ?

Post by JohnQuix » Thu Nov 02, 2017 10:05 am

After upgrading to 1.0.3 my printer does not recognize any negative coordinate values. so now it can only travel in the positive areas away from the origin. When I tried to go back to 1.0.2 it bricked my board and I was only able to use EasyPrint to get it back to 1.0.3 whihch obviously doesn't work. I hate this printer....

User avatar
William
Site Admin
Posts: 4614
Joined: Tue Jun 07, 2016 9:38 am

Re: New 2017 firmware for rostock 301 ?

Post by William » Thu Nov 02, 2017 2:09 pm

Obviously, the uploading is not successful completely. The only way is re-upload the firmware again. You can use the EasyPirnt 3d or Flash loader demo to upload.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

MAK Gravy
Posts: 0
Joined: Wed Apr 04, 2018 7:14 pm

Re: New 2017 firmware for rostock 301 ?

Post by MAK Gravy » Sat Apr 07, 2018 11:41 am

Hello.

It returns to the original, but it does not become 270 ℃.
Learn more How can I install firmware at 270 ℃?
I tried the following.

1. Bootloader V 1.0.1 installation ⇒ NG
2. gtm32 machine delta.bin installation ⇒ NG
3. rostock 301 v1.0.3.bin Installation ⇒OK (Max 220 ° C)
Attachments
IMG_6215.JPG
IMG_6215.JPG (143.97 KiB) Viewed 2114 times

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests