Cant upload my firmware

pootis_owner
Posts: 7
Joined: Sun Sep 25, 2016 3:42 pm

Cant upload my firmware

Post by pootis_owner » Sun Sep 25, 2016 3:49 pm

Hi there i have the prusa i3 pro b and want to install the 12864 lcd panel but if i want to upload the firmware i cant verify it gives an error what can i do about it.....

User avatar
William
Site Admin
Posts: 6320
Joined: Tue Jun 07, 2016 9:38 am

Re: Cant upload my firmware

Post by William » Mon Sep 26, 2016 6:23 pm

pootis_owner wrote:Hi there i have the prusa i3 pro b and want to install the 12864 lcd panel but if i want to upload the firmware i cant verify it gives an error what can i do about it.....
What Arduino version are you using?Try Arduino 1.0.1:
https://www.arduino.cc/en/Main/OldSoftw ... ases#1.0.x
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pootis_owner
Posts: 7
Joined: Sun Sep 25, 2016 3:42 pm

Re: Cant upload my firmware

Post by pootis_owner » Tue Sep 27, 2016 11:17 pm

I have got it the new arduino works but i have uploaded my marlin firmware to work with the full graphics controller with the u8glib files but it isnt working just beeping and flashing..... but the 2004lcd works just fine.... what do i wrong??

Toy
Site Admin
Posts: 116
Joined: Mon May 16, 2016 8:40 am

Re: Cant upload my firmware

Post by Toy » Wed Sep 28, 2016 10:26 am

There's difference setting for 12864 and 2004 in firmware,
Refer to this link:
http://www.geeetech.com/forum/viewtopic ... 23&t=17040

pootis_owner
Posts: 7
Joined: Sun Sep 25, 2016 3:42 pm

Re: Cant upload my firmware

Post by pootis_owner » Thu Sep 29, 2016 3:33 pm

I have tryed the link that you send me but not working i have tryed the other cables but only flashing and beeping.. cant get it to work :( someone knows the problem??

Toy
Site Admin
Posts: 116
Joined: Mon May 16, 2016 8:40 am

Re: Cant upload my firmware

Post by Toy » Fri Sep 30, 2016 11:06 am

You can try the firmware for A pro which uses the LCD12864,
see if it works.
http://www.geeetech.com/forum/download/file.php?id=2100

pootis_owner
Posts: 7
Joined: Sun Sep 25, 2016 3:42 pm

Re: Cant upload my firmware

Post by pootis_owner » Sat Oct 01, 2016 3:21 am

ok i will give it a try but do i need to add the u8glib files? and do i need to change anything??? steps per mm??

pootis_owner
Posts: 7
Joined: Sun Sep 25, 2016 3:42 pm

Re: Cant upload my firmware

Post by pootis_owner » Sat Oct 01, 2016 4:43 pm

I have tryed the pro a firmware then the screen isnt doing anything..... not light nothing :cry:

User avatar
William
Site Admin
Posts: 6320
Joined: Tue Jun 07, 2016 9:38 am

Re: Cant upload my firmware

Post by William » Tue Oct 04, 2016 3:27 pm

pootis_owner wrote:I have tryed the pro a firmware then the screen isnt doing anything..... not light nothing :cry:
Did you add the U8glib files when you compiled the firmware?And did it compile successfully?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

pootis_owner
Posts: 7
Joined: Sun Sep 25, 2016 3:42 pm

Re: Cant upload my firmware

Post by pootis_owner » Fri Oct 07, 2016 5:46 pm

I have added u8glib and then compiling it and then upload but it is not working....

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests