Page 2 of 7

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Sat Sep 17, 2016 3:59 am
by ric chin
Nope still does it...way less, but still retracts too much and you loose filament continuum.

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Tue Sep 27, 2016 6:10 am
by Lami René
Hello,

And for users on Linux Kubuntu 16.04 64-bit, how we should proceed and what software?

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Tue Sep 27, 2016 6:11 pm
by William
Lami René wrote:Hello,

And for users on Linux Kubuntu 16.04 64-bit, how we should proceed and what software?
Hi,
The engineer said you guys can find a similar terminal on Linux like the one on Windows,just need to make sure the baud rate and the protocol are the same as the pics show:
QQ截图20160927180502.jpg
QQ截图20160927180502.jpg (21.03 KiB) Viewed 19696 times
QQ截图20160927180516.jpg
QQ截图20160927180516.jpg (18.33 KiB) Viewed 19696 times

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Tue Sep 27, 2016 6:57 pm
by Lami René
Bonjour,

Merci pour ces informations !

Pourriez-vous nous préciser le nom des paquets Linux à installer et à utiliser ou les lignes de comment à copier/coller dans un terminal pour installer ces logiciels dans nos ordinateurs Linux ?

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Wed Sep 28, 2016 11:50 am
by Toy
Hi,
It's not easy to flash the firmware in linux, you'll need something linke J-link, minicom, and we haven't tried that yet.
You'd better use a windows system to do that.

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Wed Sep 28, 2016 4:41 pm
by Lami René
Bonjour,

Merci pour ces informations !

J'ai installé "minicom (2.7-1build1)" et "cutecom (0.22.0-2)" plus "lrzsz (0.12.21-8)", mais je n'ai jamais utilisé ce genre de logiciel. Alors il nous faudrait des copies d'écrans comme ce que vous avez fait pour les utilisateurs de MS-Windows.

S'il vous plaît, pourriez-vous procédé rapidement à vos essais pour être en mesure de nous transmettre la procédure exacte et détaillée à utiliser pour mettre à jour le firmeware !

Merci d'avance pour la promptitude avec laquelle vous produirez le guide de mise à jour du firmeware sous Linux Kubuntu.

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Mon Oct 03, 2016 2:06 pm
by Lami René
Toy wrote: ...
You'd better use a windows system to do that.
Je n'utilise ce type de système ou de logiciel de Microsoft, j'utilise uniquement Linux Kubuntu 16.04 64 bits !

Sur votre page Web de l'imprimante Geeetech Restock 301 :

http://www.geeetech.com/geeetech-rostoc ... -1008.html

vous écrivez :

« Operating system: Windows/Mac/Linux »

Alors, je m'attends a ce que vous respectiez votre parole, votre texte écrit sur le Web.

Cordialement,

L'ami René

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Tue Oct 04, 2016 10:28 am
by William
Lami René wrote:
Toy wrote: ...
You'd better use a windows system to do that.
Je n'utilise ce type de système ou de logiciel de Microsoft, j'utilise uniquement Linux Kubuntu 16.04 64 bits !

Sur votre page Web de l'imprimante Geeetech Restock 301 :

http://www.geeetech.com/geeetech-rostoc ... -1008.html

vous écrivez :

« Operating system: Windows/Mac/Linux »

Alors, je m'attends a ce que vous respectiez votre parole, votre texte écrit sur le Web.

Cordialement,

L'ami René
Hi,
I guess « Operating system: Windows/Mac/Linux »
means the software Repetier Host:
QQ截图20161004102140.jpg
QQ截图20161004102140.jpg (86.84 KiB) Viewed 19356 times
Actually,you don't need to flash the firmware for 301(it can't be modified because of the close source),and it is well flashed when it leaves the factory.
So i guess it doesn't matter.

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Tue Oct 04, 2016 12:13 pm
by Lami René
Bonjour William Kwok,

Pas seulement, c'est pour tout ce qui touche les logiciels, le software ! Geeetech doit fournit pour les trois environnements (MS Windows, Mac et Linux) les logiciels ainsi que la documentation adéquate pour les trois.

Comme ici, la liste des paquets a installer et la procédure bien documentée pour le faire sous Linux pour la mise à jour du micrologiciel (firmware) de la carte contrôleur GTM32 Pro.

Cordialement,

L'ami René

Re: The Restock 301(STM32 Pro Board) Firmware Burning Steps

Posted: Sat Oct 15, 2016 1:56 am
by raoulito9
Hi.
I'm trying to burn new firmware on my 301.
All is Ok with the first part, but the final doesnot work.
When i try to send the new firmware with hyperterminal, the process does not work, and i get a time out.
No problem to burn the bootloader, and the no problem to connect with hyperterminal.
I tried to run it under admin mode, Windows XP compatobility mode, the printer alims off, then on, on various usb 2 or 3 ports, and it just does not burn anything.
My PC is a recent W 10 64 bits machine.
Look at the 2 screenshots :
CaptureHT.PNG
CaptureHT.PNG (72.43 KiB) Viewed 19647 times
CaptureHT2.PNG
CaptureHT2.PNG (52.66 KiB) Viewed 19647 times