How to install the firmware for GT2560

User avatar
William
Site Admin
Posts: 5136
Joined: Tue Jun 07, 2016 9:38 am

Re: How to install the firmware for GT2560

Post by William » Wed Feb 13, 2019 11:30 am

Anonymous1234567890 wrote:
Tue Feb 05, 2019 9:42 am
I tried uploading to my i3 Pro X but I get this error:

Code: Select all


Arduino: 1.8.8 (Windows Store 1.8.19.0) (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

In file included from sketch\Marlin.h:23:0,

                 from sketch\planner.cpp:54:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\SdBaseFile.cpp:21:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\stepper.cpp:24:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\Sd2Card.cpp:20:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\temperature.h:24,

                 from sketch\ultralcd.cpp:1:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\BlinkM.cpp:5:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\SdBaseFile.cpp:24:0:

SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct'

 struct fpos_t {

        ^

In file included from sketch\Marlin.h:10:0,

                 from sketch\SdBaseFile.cpp:21:

c:\program files\windowsapps\arduinollc.arduinoide_1.8.19.0_x86__mdqgnx93n4wtt\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

 __extension__ typedef long long fpos_t;

                                 ^

sketch\SdBaseFile.cpp: In member function 'void SdBaseFile::getpos(fpos_t*)':

SdBaseFile.cpp:298:8: error: request for member 'position' in '* pos', which is of non-class type 'fpos_t {aka long long int}'

   pos->position = curPosition_;

        ^

SdBaseFile.cpp:299:8: error: request for member 'cluster' in '* pos', which is of non-class type 'fpos_t {aka long long int}'

   pos->cluster = curCluster_;

        ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\motion_control.cpp:22:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\SdFile.cpp:20:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

sketch\SdBaseFile.cpp: In member function 'void SdBaseFile::setpos(fpos_t*)':

SdBaseFile.cpp:1496:23: error: request for member 'position' in '* pos', which is of non-class type 'fpos_t {aka long long int}'

   curPosition_ = pos->position;

                       ^

SdBaseFile.cpp:1497:22: error: request for member 'cluster' in '* pos', which is of non-class type 'fpos_t {aka long long int}'

   curCluster_ = pos->cluster;

                      ^

In file included from sketch\SdFile.h:27:0,

                 from sketch\cardreader.h:8,

                 from sketch\stepper.cpp:30:

SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct'

 struct fpos_t {

        ^

In file included from sketch\Marlin.h:10:0,

                 from sketch\stepper.cpp:24:

c:\program files\windowsapps\arduinollc.arduinoide_1.8.19.0_x86__mdqgnx93n4wtt\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

 __extension__ typedef long long fpos_t;

                                 ^

In file included from sketch\SdFile.h:27:0,

                 from sketch\cardreader.h:8,

                 from sketch\ultralcd.cpp:6:

SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct'

 struct fpos_t {

        ^

In file included from sketch\Marlin.h:10:0,

                 from sketch\temperature.h:24,

                 from sketch\ultralcd.cpp:1:

c:\program files\windowsapps\arduinollc.arduinoide_1.8.19.0_x86__mdqgnx93n4wtt\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

 __extension__ typedef long long fpos_t;

                                 ^

In file included from sketch\SdFile.h:27:0,

                 from sketch\SdFile.cpp:23:

SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct'

 struct fpos_t {

        ^

In file included from sketch\Marlin.h:10:0,

                 from sketch\SdFile.cpp:20:

c:\program files\windowsapps\arduinollc.arduinoide_1.8.19.0_x86__mdqgnx93n4wtt\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

 __extension__ typedef long long fpos_t;

                                 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\SdFatUtil.cpp:20:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

exit status 1
sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\cardreader.cpp:1:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\MarlinSerial.cpp:23:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\SdFile.h:27:0,

                 from sketch\cardreader.h:8,

                 from sketch\cardreader.cpp:2:

SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct'

 struct fpos_t {

        ^

In file included from sketch\Marlin.h:10:0,

                 from sketch\cardreader.cpp:1:

c:\program files\windowsapps\arduinollc.arduinoide_1.8.19.0_x86__mdqgnx93n4wtt\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

 __extension__ typedef long long fpos_t;

                                 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\thermistortables.h:4,

                 from sketch\Configuration.h:792,

                 from C:\Users\Owner\Desktop\I3_pro_X\Marlin\Marlin.ino:33:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\Marlin_main.cpp:30:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\vector_3.cpp:20:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\temperature.cpp:32:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\thermistortables.h:4,

                 from sketch\Configuration.h:792,

                 from sketch\digipot_mcp4451.cpp:1:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

sketch\Marlin_main.cpp:2667:36: warning: invalid suffix on literal; C++11 requires a space between literal and string macro [-Wliteral-suffix]

         LCD_MESSAGEPGM(MACHINE_NAME" "MSG_OFF".");

                                    ^

sketch\temperature.cpp:565:50: warning: extra tokens at end of #ifdef directive

     #ifdef THERMAL_RUNAWAY_PROTECTION_BED_PERIOD && THERMAL_RUNAWAY_PROTECTION_BED_PERIOD > 0

                                                  ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\ConfigurationStore.cpp:1:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\Marlin.h:23:0,

                 from sketch\thermistortables.h:4,

                 from sketch\Configuration.h:792,

                 from sketch\Servo.cpp:44:

sketch\pins.h:2956:0: warning: "X_MAX_PIN" redefined

 #define X_MAX_PIN          -1

 ^

sketch\pins.h:1363:0: note: this is the location of the previous definition

 #define X_MAX_PIN 24

 ^

sketch\pins.h:2957:0: warning: "Y_MAX_PIN" redefined

 #define Y_MAX_PIN          -1

 ^

sketch\pins.h:1369:0: note: this is the location of the previous definition

 #define Y_MAX_PIN 28

 ^

sketch\pins.h:2958:0: warning: "Z_MAX_PIN" redefined

 #define Z_MAX_PIN          -1

 ^

sketch\pins.h:1375:0: note: this is the location of the previous definition

 #define Z_MAX_PIN 32

 ^

In file included from sketch\SdFile.h:27:0,

                 from sketch\cardreader.h:8,

                 from sketch\Marlin_main.cpp:44:

SdBaseFile.h:38:8: error: using typedef-name 'fpos_t' after 'struct'

 struct fpos_t {

        ^

In file included from sketch\Marlin.h:10:0,

                 from sketch\Marlin_main.cpp:30:

c:\program files\windowsapps\arduinollc.arduinoide_1.8.19.0_x86__mdqgnx93n4wtt\hardware\tools\avr\avr\include\stdio.h:950:33: note: 'fpos_t' has a previous declaration here

 __extension__ typedef long long fpos_t;

                                 ^

using typedef-name 'fpos_t' after 'struct'

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
I know, it's a long error but I need to know how to fix it. :geek: :geek: :?
It means you try to upload the fw via Arduino 1.6.5 or higher.
Try to upload it via Arduino 1.0.1.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Mad Monkey
Posts: 12
Joined: Mon Dec 31, 2018 10:02 am

Re: How to install the firmware for GT2560

Post by Mad Monkey » Wed Apr 03, 2019 2:39 am

I have a brandnew i3 Pro W that i have built

i attempted to print using sd card and it just says none installed, tried via USB and it didnt respond, all signs pointed to updating firmware..

i hooked the pc up to printer, downloaded the Prow firmware from this forum. and ardino 1.01.
verified the sketch and it verifies (baord 2560 com3)
when i click upload it loads 80% of the way and just hangs out.. no error, i left it for over an hr same result.
when i uplugged it i now have a blank screen on my LCD..

please advise what software and firmware files i ACTUALLY need.

Thanks

Mad Monkey
Posts: 12
Joined: Mon Dec 31, 2018 10:02 am

Re: How to install the firmware for GT2560

Post by Mad Monkey » Wed Apr 03, 2019 3:12 am

i have tried several times to add the Prow firmware to my printer, using arduino 1.0.1 and it verifies fine, but when i click upload it gets almost there and doesnt complete no errors

Mad Monkey
Posts: 12
Joined: Mon Dec 31, 2018 10:02 am

Re: How to install the firmware for GT2560

Post by Mad Monkey » Wed Apr 03, 2019 5:53 am

Ive let it run now and im getting time out errors..

ive followed everything on this page http://www.geeetech.com/forum/viewtopic ... 20&t=17102

short of resoldering the crystal.. what am I missing?

Mad Monkey
Posts: 12
Joined: Mon Dec 31, 2018 10:02 am

Re: How to install the firmware for GT2560

Post by Mad Monkey » Wed Apr 03, 2019 8:12 am

resoldering did nothing. still times out regardless of which usb port i use or cable. etc.
the board is comepletely disconnected and stil fails.

User avatar
William
Site Admin
Posts: 5136
Joined: Tue Jun 07, 2016 9:38 am

Re: How to install the firmware for GT2560

Post by William » Wed Apr 03, 2019 10:08 am

Hi,Mad
I think you should check the hardware at first.
If your printer has an issue of the power,it may cause you can't upload the fw to your printer.
You can use the multimeter check the PSU output is normal (12V).
Or you can try to upload the fw without the PSU cable but get the power from the USB cable.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Mad Monkey
Posts: 12
Joined: Mon Dec 31, 2018 10:02 am

Re: How to install the firmware for GT2560

Post by Mad Monkey » Fri Apr 05, 2019 7:27 am

I tried several times uploading firmware with the board completely disconnected just plugged in via USB..

I was able to get the printer operating again but I'd still like to update the fw at some point

alecs13
Posts: 1
Joined: Wed Apr 24, 2019 4:46 am

Re: How to install the firmware for GT2560

Post by alecs13 » Wed Apr 24, 2019 5:17 am

hi guys ! Very new and newbie at Arduinos and programing !
So i have tried to upload the Merlin firmware to my GT2560 I get this error; any idea how to fix it ?
Image

dga78
Posts: 4
Joined: Thu May 02, 2019 10:40 pm

Re: How to install the firmware for GT2560

Post by dga78 » Thu May 02, 2019 11:59 pm

Hi guys
Some help please.

Just built a pro x and uploaded firmware (arduino 1.0.1 with Marlin) on my MAC. Firmware loaded and I can connect via USB with Repetier, but the LCD has both lines blocked out. Any ideas?

User avatar
vert
Site Admin
Posts: 1027
Joined: Wed Nov 21, 2018 3:50 pm
Location: Marlin Dev
Contact:

Re: How to install the firmware for GT2560

Post by vert » Fri May 03, 2019 8:38 am

dga78 wrote:
Thu May 02, 2019 11:59 pm
Hi guys
Some help please.

Just built a pro x and uploaded firmware (arduino 1.0.1 with Marlin) on my MAC. Firmware loaded and I can connect via USB with Repetier, but the LCD has both lines blocked out. Any ideas?
guess you don't have the screen enabled.

Locked

Who is online

Users browsing this forum: No registered users and 36 guests