MAC FIRMWARE INSTALLATION- Step by step

Post Reply
Nique
Posts: 2
Joined: Tue Oct 20, 2015 6:34 pm

MAC FIRMWARE INSTALLATION- Step by step

Post by Nique » Wed Oct 21, 2015 8:50 am

Hi,

is it possible to get a step by step guide to installing the firmware for mac?
I have been working on my printer for the past 2 months and have been stuck at this point for at least 6 weeks.

Thanks.

Sherry
Posts: 362
Joined: Wed Jul 01, 2015 12:52 pm

Re: MAC FIRMWARE INSTALLATION- Step by step

Post by Sherry » Wed Oct 21, 2015 11:05 am

Nique wrote:Hi,

is it possible to get a step by step guide to installing the firmware for mac?
I have been working on my printer for the past 2 months and have been stuck at this point for at least 6 weeks.

Thanks.
In fact ,there is no difference between burning firmware in Win OS and Mac OS.Just change baud rate from 250000 to 115200 in configration.h .In repetier host ,the baud rate should select 115200 as well.
QQ图片20151021110354.png
QQ图片20151021110354.png (67.98 KiB) Viewed 4871 times

Post Reply