Firmware for geeetech 3D printers

Nils
Posts: 2
Joined: Thu Jan 31, 2019 3:55 am

Re: Firmware for geeetech 3D printers

Post by Nils » Wed Jun 12, 2019 2:31 am

vert wrote:
Tue Jun 11, 2019 10:58 am
Nils wrote:
Mon Jun 10, 2019 10:48 pm
Hello.
In the firmware for the I3 Pro B there is an error so that I can not upload the file to my printer. I use the Arduino software version 1.8.5
Would it be possible that one cares about this issue and informs me as soon as the firmware goes again?

Error code :
exit status 1
using typedef-name 'fpos_t' after 'struct'

The error is in the SdBaseFile.h file
looks like a version incompatibility error
what version of marlin is it as arduino 1.8.5 works with 1.1.8 but not older marlin.

I downloaded an older version of Arduino and that was it. So the firmware versions of the I3 Pro B which are in the forum above are not compatible with the current version of Arduino. Maybe someone can update the firmware to match the current Arduino software

User avatar
vert
Site Admin
Posts: 492
Joined: Wed Nov 21, 2018 3:50 pm
Location: indoors
Contact:

Re: Firmware for geeetech 3D printers

Post by vert » Wed Jun 12, 2019 8:48 am

Nils wrote:
Wed Jun 12, 2019 2:31 am
vert wrote:
Tue Jun 11, 2019 10:58 am
Nils wrote:
Mon Jun 10, 2019 10:48 pm
Hello.
In the firmware for the I3 Pro B there is an error so that I can not upload the file to my printer. I use the Arduino software version 1.8.5
Would it be possible that one cares about this issue and informs me as soon as the firmware goes again?

Error code :
exit status 1
using typedef-name 'fpos_t' after 'struct'

The error is in the SdBaseFile.h file
looks like a version incompatibility error
what version of marlin is it as arduino 1.8.5 works with 1.1.8 but not older marlin.

I downloaded an older version of Arduino and that was it. So the firmware versions of the I3 Pro B which are in the forum above are not compatible with the current version of Arduino. Maybe someone can update the firmware to match the current Arduino software
nobody works on the old firmware anymore its been unsupported for a long time try using marlin 2.0 if you want the current version of marlin as well as arduino.

Vertabreaker's Discord
Vertabreaker's Youtube
Vertabreaker's Thingiverse
Marlin 2 Build Forum Post
Note:my opinions & comments are my own i am not employed by geeetech

sundogz
Posts: 3
Joined: Thu Jun 13, 2019 11:16 pm

Re: Firmware for geeetech 3D printers

Post by sundogz » Thu Jun 13, 2019 11:31 pm

I have one of the first Acrylic I3 ProB printers and my hotend now heats 35-40 degrees higher that it's set for. I've changed thermistors twice with no joy - so swapped boards thinking it was the firmware. But the the problem with hotend is still there, and the new board must be for the T8 rods (mine has the M10's) - the Z just crawls a couple inches and stops. I don't know how to set it - the LCD 'load' and 'save' features reset after power down.
Do you have the old version of firmware available or can tell me how to check set this. I have gone over the Arduino thread but guess I am not smart enough. :shock: I use this printer every day and miss it. I hope you can help

TribunXy
Posts: 1
Joined: Mon Jul 01, 2019 2:48 pm

Re: Firmware for geeetech 3D printers

Post by TribunXy » Mon Jul 01, 2019 2:52 pm

is it possible to get Marlin 1.1.9 for the Pro W? Or at least a list of the values ​​that have to be changed in the original firmware?

User avatar
_kaktus_
Site Admin
Posts: 1105
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Firmware for geeetech 3D printers

Post by _kaktus_ » Thu Jul 04, 2019 11:51 pm

lauraroz wrote:
Thu Jul 04, 2019 5:04 pm
A mi me vino genial para impresión 3d para regalos de comunión para niños
Admin wrote:
Tue Aug 28, 2018 5:59 pm
Hi,guys!
In order to create a more comfortable discussion environment for forum members.
We have to make some rules,
  1. Mutual respect. Every member should respect each other, which is a prerequisite for mutual discussion. This is like a "mirror". If you don't respect others, we can only tell you with regret: Please leaves this forum!
    ....
  2. This forum brings together members from all over the world, so be kind and write in English. This will make it much simpler and easier to search the content.
    ...
    Admin 2018-08-26
    Update: 2019-03-02
    ...
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Marcellus
Posts: 9
Joined: Tue Jul 02, 2019 11:25 pm

Re: Firmware for geeetech 3D printers

Post by Marcellus » Wed Jul 10, 2019 3:31 pm

Hello

Please tell us when a new firmware will be released (Geeetech A30) ?!?

Greets

User avatar
William
Site Admin
Posts: 3721
Joined: Tue Jun 07, 2016 9:38 am

Re: Firmware for geeetech 3D printers

Post by William » Wed Jul 10, 2019 3:42 pm

Thanks for your feedback.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

sasy
Posts: 9
Joined: Tue Jul 09, 2019 8:56 am

Re: firmware for geeeteh 3D printers

Post by sasy » Sun Jul 21, 2019 2:24 am

HunterG wrote:
Sun Jan 17, 2016 10:47 am
My new i3 pro c firmware x axis needs to be inverted so I opened the firmware changed x from false to true click verify and I get an error.

Arduino: 1.6.7 (Windows 10), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"

Build options changed, rebuilding all
sketch\temperature.cpp: In function 'void manage_heater()':

temperature.cpp:665: error: unable to find a register to spill in class 'POINTER_REGS'

}

^

temperature.cpp:665: error: this is the insn:

(insn 98 97 100 4 (set (reg/v:SF 103 [ pid_input ])

(mem:SF (post_inc:HI (reg:HI 146 [ ivtmp.209 ])) Tutuapp 9Apps ShowBox [4 MEM[base: _110, offset: 0B]+0 S4 A8])) sketch\temperature.cpp:449 99 {*movsf}

(expr_list:REG_INC (reg:HI 146 [ ivtmp.209 ])

(nil)))

sketch\temperature.cpp:665: confused by earlier errors, bailing out

exit status 1
unable to find a register to spill in class 'POINTER_REGS'

This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.

What is the problem?
Thanks alot, i have a new problem now, the printer wont home on Y axis, it does ok in the x and z axis, but wont work on the Y, any ideas why wont work? what can i do? thanks!

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests