Firmware for geeetech 3D printers

maciejm
Posts: 3
Joined: Sun Dec 30, 2018 10:46 pm
Location: Berlin/Germany

Re: Firmware for geeetech 3D printers

Post by maciejm » Sun Jan 06, 2019 7:05 pm

Is it possible to get the *.hex file of the initial Firmware release the Acrylic i3 pro b https://www.geeetech.com/acrylic-geeete ... p-917.html with LCD2004 and GT2560 Rev A+ Board is shipped with?

User avatar
William
Site Admin
Posts: 3979
Joined: Tue Jun 07, 2016 9:38 am

Re: Firmware for geeetech 3D printers

Post by William » Mon Jan 07, 2019 11:46 am

@maciejm
Hi,
you can refer to it:
http://geeetech.com/firmware/
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

maciejm
Posts: 3
Joined: Sun Dec 30, 2018 10:46 pm
Location: Berlin/Germany

Re: Firmware for geeetech 3D printers

Post by maciejm » Tue Jan 08, 2019 3:10 am

@William
Hi,
thank you for the fast reply.
In the about field of my Printer, the following information ist displayed:
Pi3 Pro B
Ver: 1.0.05

On the Download Site I can find only Ver: 1.0.04.
Is it possible to get the Ver: 1.0.5 *.hex file?

surfersteve1
Posts: 1
Joined: Thu Jan 10, 2019 3:39 am

Re: Firmware for geeetech 3D printers

Post by surfersteve1 » Thu Jan 10, 2019 3:59 am

I have the Prusa i3 Pro W (Wood frame) with the newer T8 Threaded Rod Lead Screws and GT2560 Control Board. Which FW do I download and install? I see a few listed for different Prusa i3 Pro models but not the "W" version. There is also one "W" model listed but it only says "Pro W" and doesnt say Prusa or i3.

User avatar
_kaktus_
Site Admin
Posts: 1160
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Firmware for geeetech 3D printers

Post by _kaktus_ » Fri Jan 11, 2019 3:09 am

Hello.
:mrgreen:
surfersteve1 wrote:
Thu Jan 10, 2019 3:59 am
I have the Prusa i3 Pro W (Wood frame) with the newer T8 Threaded Rod Lead Screws and GT2560 Control Board. Which FW do I download and install? I see a few listed for different Prusa i3 Pro models but not the "W" version. There is also one "W" model listed but it only says "Pro W" and doesnt say Prusa or i3.
Some names are abbreviated.
Follow the model designation "W". Prusa I3 is a distinguishing mark of the series to which your printer belongs. Pro W or W refers to one model.
;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Bikerbuz
Posts: 2
Joined: Mon Jan 14, 2019 9:21 pm

Re: Firmware for geeetech 3D printers

Post by Bikerbuz » Tue Jan 15, 2019 10:10 pm

Hi there.

I have a really weird error (at least I think so) on my Mecreator 2, that I suspect is connected to a firmware issue.

I had a runaway temp on the nozzle a while back and melted a bunch of stuff. I replaced what was needed, re flashed it and tried printing.
Runaway temp once again.

The thing is that everything works fine up to 79c on the nozzle. As soon as I go above that it starts to get more and more inaccurate. For instance if I set it to 100c, it ends up at between 177c and 185c. It's not constantly ending up at exactly the same temp, it differs up to about 10c.
I replaced the thermistor again, but no improvement. Does anyone have any idea how to solve this?

*Edit*
It actually does trickle down to the correct temp eventually, but that means that if I for example want to print PLA at 200c, it simply gets way to hot before it eventually can settle at the correct temp
I guess this also happens when it tries to correct the temp mid print and that's what triggered the runaway temp the first time.

CT3D
Posts: 2
Joined: Thu Jan 17, 2019 10:29 pm

Re: Firmware for geeetech 3D printers

Post by CT3D » Sat Jan 19, 2019 12:08 am

Hey all, just received the A10, don't know if the firmware is updated and I saw there are two different 2560 boards. How do I know which one to DL?

CT3D
Posts: 2
Joined: Thu Jan 17, 2019 10:29 pm

Re: Firmware for geeetech 3D printers

Post by CT3D » Sat Jan 19, 2019 8:12 am

Can anyone help me out with this, I try and load FW update and Arduino comes u with this

Code: Select all

This report would have more information with
  "Show verbose output during compilation"
  enabled in File > Preferences.
Arduino: 1.0.6 (Mac OS X), Board: "Arduino Mega 2560 or Mega ADK"
In file included from MarlinConfig.h:40,
                 from Marlin.h:36,
                 from planner_bezier.cpp:30:
SanityCheck.h:36:4: error: #error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain."
In file included from MarlinConfig.h:40,
                 from Marlin.h:36,
                 from planner_bezier.cpp:30:
SanityCheck.h:296: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:579: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:638: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:750: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:1312: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:1517: error: expected constructor, destructor, or type conversion before 'float'
SanityCheck.h:1517: error: expected unqualified-id before ',' token
SanityCheck.h:1518: error: expected constructor, destructor, or type conversion before '=' token
SanityCheck.h:1518: error: expected unqualified-id before ',' token
SanityCheck.h:1519: error: expected constructor, destructor, or type conversion before '=' token
SanityCheck.h:1520: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:1521: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:1522: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:1523: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:1524: error: expected constructor, destructor, or type conversion before '(' token
SanityCheck.h:1525: error: expected constructor, destructor, or type conversion before '(' token
In file included from planner_bezier.cpp:30:
Marlin.h:543: error: use of enum 'RecState' without previous declaration
Marlin.h:543: error: expected unqualified-id before ':' token
Marlin.h:555: error: 'RecState' does not name a type

Dks85
Posts: 4
Joined: Sat Feb 02, 2019 10:54 pm

Re: Firmware for geeetech 3D printers

Post by Dks85 » Sat Feb 02, 2019 10:59 pm

I have use Firmware for I3 Pro C A+ with 3DTouch but dont work.
When I use G28 code extruders goes out of bed

User avatar
William
Site Admin
Posts: 3979
Joined: Tue Jun 07, 2016 9:38 am

Re: Firmware for geeetech 3D printers

Post by William » Wed Feb 13, 2019 1:21 pm

Maybe you can attach the video link.
We will help to check it.
;)
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests