Firmware for geeetech 3D printers

Locked
User avatar
William
Site Admin
Posts: 4172
Joined: Tue Jun 07, 2016 9:38 am

Re: Firmware for geeetech 3D printers

Post by William » Wed Oct 12, 2016 2:01 pm

The latest firmware for Rostock 301 is 1.0.0.2,and you can upload it to your printer.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

flintewn
Posts: 7
Joined: Tue Aug 30, 2016 11:14 pm
Location: Montpellier (FRANCE)

Re: Firmware for geeetech 3D printers

Post by flintewn » Tue Oct 18, 2016 4:57 pm

William Kwok wrote:The latest firmware for Rostock 301 is 1.0.0.2,and you can upload it to your printer.
Hi,


what's are the bug fixes ?
You should provide us the source code, because you are using marlin who's under GNU GPL v3.
thanks in advance.

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: Firmware for geeetech 3D printers

Post by Lami René » Tue Oct 18, 2016 6:04 pm

Bonjour au personnel de Geeetech,

Est-ce que le responsable des numéros de version des micrologiciels "firmware" et des noms des fichiers pour ces mêmes micrologiciels n'a pas honte du désordre qu'il y a chez Geeetech ?

Cordialement,

L'ami René
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

User avatar
Lami René
Posts: 195
Joined: Mon Sep 26, 2016 6:47 pm
Location: Sherbrooke, Québec, Canada

Re: Firmware for geeetech 3D printers

Post by Lami René » Mon Nov 14, 2016 10:38 am

Bonjour,

En cherchant une solution pour la procédure pour la mise à jour sous Linux Kubuntu du micrologiciel "Firmeware" pour l'imprimante Rostock 301 et de sa carte contrôleur GTM32 Pro, j'ai trouvé dans les dépôts standard de Linux Kubuntu 16.04 64 bits en français le logiciel "CuteCom" (voir le clip-écran).

Je pense que vos techniciens pourraient utiliser ce logiciel pour nous indiquer la configuration et les détails de la procédure à suivre pour graver la dernière version du micrologiciel "Firmeware" pour l'imprimante Rostock 301 et de la carte contrôleur GTM32 Pro sous Linux et respecter son engagement de fournir une solution pour les ordinateurs avec Linux «Software: Operating system: Windows/Mac/Linux».

Si vos techniciens n'ont as les compétences pour le logiciel CuteCom, en standard sous Linux Kubuntu il y aussi les logiciels Arduino et Moserial, si vos techniciens ont plus de compétence avec ces deux derniers logiciels.

Est-ce que Geeetech a de l'honneur et donne de l'importance à ses clients ?

Nous le verrons très prochainement de la manière qu'ils vont traiter la présente suggestion et les nouvelles solutions avec ces trois logiciels différents !

Cordialement,

L'ami René
P.-s. J'ai l'imprimante depuis le 27 octobre 2016 et je n'ai toujours rien imprimé avec, car Geeetech ne donne pas les solutions à nos problèmes...
Attachments
CuteCom Linux Kubuntu 16.04 64 bits.png
Clip-écran du logiciel CuteCom sous Linux Kubuntu 16.04 64 bits
CuteCom Linux Kubuntu 16.04 64 bits.png (39 KiB) Viewed 6439 times
Un pour tous et tous pour un !
One for all and all for one !
-------------------------------------
Mon imprimante modifié : http://forums.reprap.org/read.php?178,781375,781375
Voir aussi pour mes pièces : https://www.thingiverse.com/thing:2464177

thonys
Posts: 1
Joined: Mon Nov 14, 2016 6:04 pm

Re: Firmware for geeetech 3D printers

Post by thonys » Mon Nov 14, 2016 6:09 pm

Hello everyone, I have just finished editing the printer geeetech I3 PRO B,
I was setting some parameters, because the extruder always went right when I click the HOME button on repetier host, only manually worked, then I decided to download the marlin version here on the forum, as appropriate for your printer PRO B, the following :

I3 pro & proB (GT2560)
Marlin-PI3_Pro_B.zip
Marlin-PI3_pro_B
(299.21 KiB) Downloaded 6825 times

But I notice that no longer works, I try to command from repetier host, but the engines do not move

May I know how should I do?
Thank you in advance.

foolycooly71@charter.net
Posts: 2
Joined: Tue Sep 27, 2016 2:37 am

Re: Firmware for geeetech 3D printers

Post by foolycooly71@charter.net » Thu Nov 17, 2016 12:36 am

This is what I have and I want to use the 3d touch on it. I am very lost I figured the pin out finally now I am confused on the firmware and setings. as you can guess I am a noob at this HICTOP 3D Printer Control Board MKS Base V1.3 RepRap Arduino-compatible. any help would be appericate. http://www.ebay.com/itm/HICTOP-3D-Print ... 2297065018

foolycooly71@charter.net
Posts: 2
Joined: Tue Sep 27, 2016 2:37 am

Re: Firmware for geeetech 3D printers

Post by foolycooly71@charter.net » Thu Nov 17, 2016 1:13 am

just figured how to add a image to post sorry it would not let me edit oringal post of mine.
Attachments
s-l1600.jpg
image of board
s-l1600.jpg (146.56 KiB) Viewed 6391 times

User avatar
William
Site Admin
Posts: 4172
Joined: Tue Jun 07, 2016 9:38 am

Re: Firmware for geeetech 3D printers

Post by William » Thu Nov 17, 2016 11:54 am

Hi,
Maybe you can refer to this post:
http://www.geeetech.com/forum/viewtopic ... 27&t=18263
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

lexus08
Posts: 1
Joined: Sun Nov 27, 2016 7:12 am

Re: Firmware for geeetech 3D printers

Post by lexus08 » Sun Nov 27, 2016 7:20 am

Hi. I have a trouble with Me Creator printer,
I changed M8 screw to Tr-8 lead screw with 2.0 mm step.
So, I have to change 2560 steps to 1600 steps in firmware.

What version of firmware is up to date? Firmware version in first post in this topic is without marlin.ino file

Which versions of Arduino Ide could I compile the firmware? in the new version 1.6 Arduino Ide i have a lot of errors.

How could I add an Sanguino board in Arduino Ide menu ?

Could you help me?

BlastF
Posts: 23
Joined: Wed Aug 31, 2016 4:21 pm

Re: Firmware for geeetech 3D printers

Post by BlastF » Tue Nov 29, 2016 6:59 pm

out of curiosity there are new versions for the Prusa i3 prop B firmware?

Locked

Who is online

Users browsing this forum: No registered users and 8 guests