How to upload the firmware to Sanguinololu

User avatar
William
Site Admin
Posts: 4215
Joined: Tue Jun 07, 2016 9:38 am

Re: How to upload the firmware to Sanguinololu

Post by William » Thu Nov 02, 2017 2:41 pm

Maybe you need to replace a new motherboard.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Matrixer
Posts: 2
Joined: Sun Sep 30, 2018 2:29 pm

Re: How to upload the firmware to Sanguinololu

Post by Matrixer » Sun Sep 30, 2018 2:34 pm

Hello!
I tried to install the firmware for my new I3 Aluminium but in the folder "sanguino" is no *.ino file like in the description viewtopic.php?f=13&t=17181
Can u help me?
thx

capnjack
Posts: 4
Joined: Wed Oct 24, 2018 8:15 pm

Re: How to upload the firmware to Sanguinololu

Post by capnjack » Fri Mar 15, 2019 6:46 pm

is it possible for someone to do this same process for this machine with a rumba+ board ..i would be eternally grateful .thanks in advance i am a dodering old 60+ with some issues with software

User avatar
William
Site Admin
Posts: 4215
Joined: Tue Jun 07, 2016 9:38 am

Re: How to upload the firmware to Sanguinololu

Post by William » Sat Mar 16, 2019 11:43 am

capnjack wrote:
Fri Mar 15, 2019 6:46 pm
is it possible for someone to do this same process for this machine with a rumba+ board ..i would be eternally grateful .thanks in advance i am a dodering old 60+ with some issues with software
The steps of uploading fw to your printer:
  1. Install the drivers for it(Check your usb chip at first.If you are using the WIN10 then you can install the drivers on device manager)
  2. Then download the fw for your printer and extract it
    Download the "U8glib.zip" files from :arduino.cc
  3. Open the"configuration.h" file and check the fw version
    (For the version 1.02~1.04,you can upload it via Arduino 1.0.1)
    (For the version 1.1.4~1.1.9,you can upload it via Arduino 1.8.5)
  4. Install the correct version arduino IDE in your printer
  5. Open the arduino ide and import the "U8glib.zip"to library
  6. File>open>click"Marlin.ino"
  7. Choose the board type then correct "COM"port
  8. Clcick upload
  9. Wating it finished and enjoy it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests